Adjustable kitchen roll holder V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created an adjustable kitchen roll holder for rolls up to a diameter of 20 cm and a height of 26 cm. Enjoy it
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I created an adjustable kitchen roll holder for rolls up to a diameter of 20 cm and a height of 26 cm.
Base_Bottom has two places for weight to improve stability.
I printed it from PETG material with a thickness of 0.2 mm, but it should also work with PLA.
You can print all parts without support.
Assembly:
Glue the MiddleRod and Handle together and insert into Base_Top. Now you can insert the KitchenRoll_SpurGearWitchHole from the bottom of the Base_Top and screw it to the MiddleRod with an M6x30mm screw with a beveled head through the hole in the KitchenRoll_SpurGearWitchHole or you can glue them together.
Insert the roll holder on each side into the Base_Bottom and then insert the Base_Top. Fasten these parts together by rotating the Base_Top.
Enjoy it