Adjustable kitchen roll holder V1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created an adjustable kitchen roll holder for rolls up to a diameter of 20 cm and a height of 26 cm. Enjoy it
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I created an adjustable kitchen roll holder for rolls up to a diameter of 20 cm and a height of 26 cm.
Base_Bottom has two places for weight to improve stability.
I printed it from PETG material with a thickness of 0.2 mm, but it should also work with PLA.
You can print all parts without support.
Assembly:
Glue the MiddleRod and Handle together and insert into Base_Top. Now you can insert the KitchenRoll_SpurGearWitchHole from the bottom of the Base_Top and screw it to the MiddleRod with an M6x30mm screw with a beveled head through the hole in the KitchenRoll_SpurGearWitchHole or you can glue them together.
Insert the roll holder on each side into the Base_Bottom and then insert the Base_Top. Fasten these parts together by rotating the Base_Top.
Enjoy it