1 / 1
TopPC Odyssey JP Hobby ER120S Nose Gear Tire Replacement in VarioShore TPU — zdjęcie 1

TopPC Odyssey JP Hobby ER120S Nose Gear Tire Replacement in VarioShore TPU

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nose Landing Gear Tire Replacement for losing weight of the plane

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
76
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

For use with the JP Hobby ER-120S Tricycle Full Set with Brakes (Sebart Avanti XS 1.9m or ARG Mistral 1.8m or EA Viper 2.0m)

Nose Landing Gear Tire Replacement for losing weight of the plane, for a total weight loss of 10 grams is accomplished when replacing the JPHobby ER120 standard tire.

Assembly of the tire is straightforward, it is a tight fit, no worries, this is on purpose so that when all screws are evenly tightened the end result is perfect.  Only one important note : the tire should be placed with the printbed side towards the hub rim, the bottom fillet has a slightly larger diameter to better accomodate the hub for a perfect finish when assembled.

Please print with the following settings :

ColorFabb VarioShore TPU @ 250C, 0.16 layer height, 12 top and bottom layers, 6 outline perimeters, gyroid infill of 50 percent.  

Respect the speeds and settings for this filament or you will get in trouble :

Suitable only for DirectDrive machines

Nozzle 0.4mm - Extrusion Multiplier 0.50 - Retract Distance 2mm - Retract Speed 900mm/min - Printing Speed 25mm/sec