1 / 1
TopPC Odyssey JP Hobby ER120S Nose Gear Tire Replacement in VarioShore TPU — image 1

TopPC Odyssey JP Hobby ER120S Nose Gear Tire Replacement in VarioShore TPU

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Nose Landing Gear Tire Replacement for losing weight of the plane

Rating
0 / 5
Likes
1
Downloads
11
Makes
0
Views
76
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

For use with the JP Hobby ER-120S Tricycle Full Set with Brakes (Sebart Avanti XS 1.9m or ARG Mistral 1.8m or EA Viper 2.0m)

Nose Landing Gear Tire Replacement for losing weight of the plane, for a total weight loss of 10 grams is accomplished when replacing the JPHobby ER120 standard tire.

Assembly of the tire is straightforward, it is a tight fit, no worries, this is on purpose so that when all screws are evenly tightened the end result is perfect.  Only one important note : the tire should be placed with the printbed side towards the hub rim, the bottom fillet has a slightly larger diameter to better accomodate the hub for a perfect finish when assembled.

Please print with the following settings :

ColorFabb VarioShore TPU @ 250C, 0.16 layer height, 12 top and bottom layers, 6 outline perimeters, gyroid infill of 50 percent.  

Respect the speeds and settings for this filament or you will get in trouble :

Suitable only for DirectDrive machines

Nozzle 0.4mm - Extrusion Multiplier 0.50 - Retract Distance 2mm - Retract Speed 900mm/min - Printing Speed 25mm/sec