1 / 1
36mm Lens Hood for Leica Elmar & Summaron — zdjęcie 1

36mm Lens Hood for Leica Elmar & Summaron

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Push-fit lens hoods for old 35mm lenses with a ~36mm outer diameter (A36 mount)

Ocena
5 / 5
Polubienia
11
Pobrania
164
Wydruki
2
Wyświetlenia
603
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

To avoid glare and as an extra layer of protection, lens hoods are quite useful. As the original 1930's/1940's ones for my wide Elmar can be more expensive than the lens itself, I decided to create a printable one to specs. These are made to resemble the original Leitz “FLQOO” and “FOOKH” lens hoods, respectively for the 35mm f/3.5 Elmar and the early 35mm f/3.5 Summaron. Both using an A36 push-fit mount, just differing in depth due to different optical construction. While they're sized for wide angles, they will naturally also not vignette with the standard 50mm lenses.

I wanted the hood to mount more securely than the models I’d tried, and landed on the solution of making the ring discreetly flattened. The natural flex of the plastic helps it stay in place, avoiding the need of a fastening screw. I added engraved text purely for fun and sized the hoods to fit a standard A42 lens cap. 

Printing

There’s no need for supports if the front side is aligned against the bed, but a brim may be helpful for better adhesion. Designed for a 0.4mm nozzle. Enabling “External Perimeters First” makes a big difference on the more complicated versions with text. 

As printers and lenses vary slightly, a test print of the mounting ring can be a good idea!

Tagi