35 modeli
Anschlagschiene 1727 für Leitz Locher 5138. Getestet mit Locher 5138, sollte aber auch mit folgenden Lochern kompatibel sein: 5005, 5008, 5012, 5022, 5038, 5132. Update 20.11.2024: Ich habe das Modell überarbeitet und einige neue…
This is a slightly adjusted version of @dietervdf's paper guide for an ordinary Leitz 5008 perforator. The adjustments in comparison to the original can be found in the git repository . Print Settings Printer Brand: Creality Printer:…
A replacement lens cap for any leitz R bayonet lenses. Ein Objektivdeckel für alle Leitz / LEICA Objektive mit R Bayonett.
Ersatzteil-Schieber mit den gängisten Einstellungen A4 und A5
Leitz 5180 Locher Anschlag
A replacement paper guide for a Leitz 5138 hole puncher
It's a lens cap, print it and push it on so your lens won't scratch Das ist ein Objektivdeckel. Druck ihn aus und steck ihn auf dein Objektiv, damit es nicht verkratzt. I printed with PETG but ABS or PLA will probably be fine too.
The adapters I've made since the original photo port adapter was lost. For old Leitz microscope, mine is SM with 170mm system; maybe works also for 160. The trinocular head has cylindrical fitting, 38mm diameter. One model (the tall one)…
paper stopper of hole punch in the office broke. since there wasn't a fitting design i threw this together Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 25% Filament: 3dJake EcoPLA…
1 unit wide, 3 units long and 9 units high
Straightforward gridfinity bin for a Leitz 5008 hole puncher. FreeCAD file available for remixing
With these drill guides, you can add additional holes for the fixed middle shelf of IKEA Billy. That way, it will hold five rows of file folders (LEITZ® or similar). I designed it so you can instantly see if you aligned them wrong -…
Aparently, Leitz 5501 doesn't mean Leitz 5501, so some staplers have a different size. If your stapler doesn't look like mine on the photo (no screw on the back of the handle etc.), I would advise you to print the larger file. Worst case,…
Made a small shelf for my perforator. It has a snug fit, and is fixed that it doesnt fall off. Have fun printing!
Leitz paper guide perforator replacement part No 190 I found 2 already made models by others. But to my taste they can be a little bit stronger with a little less bridging. So I made small adjustments to the original part (and compared to…
Bought vintage Leitz Trinovid binoculars, so I needed a case to carry it around on my nature walks. Just print it as is. PLA or PETG is okay. No support needed.
Hi, I figured I might as well share it, maybe someone else can use it. For the (relatively cheap) Leitz TruSens Z-1000 purifier I made a basket that fits inside the HEPA filter. You can fill it up with carbon pellets to have an easy…
This is a gridfinity “bin” for the hole puncher Leitz 5008. Due to the low height of my drawer, the puncher can not be stored in its full height. Therefore, this part acts as a clamp, forcing the puncher to be closed a little bit. I…
When the old one gets thrown out with the used tape roll....
When I have to punch A4 sheets, I always want to have the holes on the correct position - possible with this tool.
T-clips selection here https://www.printables.com/model/540362-skadis-t-clip-mini-parametric Please mount with base plate together
Update : I designed a much better circuit to drive the LED https://github.com/CGrassin/microscope_led_light_circuit This is a 1W/3W LED holder for the Leitz Wetzlar SM microscope. It should press-fit on the base, some minor sanding may be…
Here is the design for the "stray light plug" for the Leitz 0.80 darkfield condenser. The design has been reverse-engineered from old Leitz catalog illustration and user measurements. The default values in the Openscad are those…
Description This is a Dovetailed Adaptor designed for attaching leeve mount condensers to dovetailed holder. In the spirit of open-source hardware, I am providing the master STEP file alongside the standard STL. Community can freely…
Stand for my leitz 5645 for gridfinity, non-stackable Thinkercad link: https://www.tinkercad.com/things/bmbQyFMIKMm-leitz-5645-gridfinity
Multiboard mount for a Leitz Esselte 5008 office paper puncher (Locher). You need 2x 13mm Small Thread - Flat Head - T-Bolt
Gridfinity Hole Punch Holder. The design allows you to store your hole punch either extended or tucked in.
My Leitz SM microscope has the low voltage condenser (#051 475), but was missing the lamp holder and transformer. This lamp holder fits standard E10 low voltage bulbs powered from a DC power jack (RND 205-00905) and incorporates a…
Holder for waterhouse stops in front of lens. Projector lens Leitz Dimaron F2.8, can cover 4x5 , but DoF was very shallow. Designed holder for front of the lens, fricktion fit to the lens barrel. Waterhouse stop is pressed to the holder.…
Leitz (Leica) epis 800mm F3.5 lens rear cap
A Gridfinity 3x3 bin designed specifically to fit the Leitz 5008 hole punch. The recessed profile ensures the punch stays seated while in a drawer, preventing it from sliding around. A perfect addition to a Gridfinity-based office or desk…
