1 / 8
Enclosure for my esp32-12chan-WLED-pwm-PCB — zdjęcie 1
1 / 8

Enclosure for my esp32-12chan-WLED-pwm-PCB

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed this as a way to dive deep into FreeCAD's features.

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
0
Wyświetlenia
183
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Enclosure designed in FreeCAD for my 12channel PWM WLED PCB designed in KiCAD.

You can find the FreeCAD files for the model here

Printing

prints well, even with 0.6mm nozzle size and 0.20mm layer height.

No supports needed.

Assembly
  1. Print both top and bottom as separate parts.
  2. Insert the PCB into the lower enclosure part.
  3. Attach antenna to top enclosure part.
  4. Attach antenna to ESP32.
  5. Optionally attach microphone to socket.
  6. Close enclosure by clipping top part into bottom part.

Support

please like the model

Tagi