QCTP AXA BXA Bracket System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a system to hold all of my BXA tool holders and wanted one to mount to the wall behind the lathe.This system…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a system to hold all of my BXA tool holders and wanted one to mount to the wall behind the lathe.
This system uses a piece of 1-5/8 Uni-Strut available from most hardware stores and the AXA or BXA holders clip on and are retained by both the hook and a small 12x3mm magnet pressed in to the back. The wall brackets have printed threads for a ¼-20 set screw in the front to lock the uni-strut in position.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
**Rafts:**
No
Supports:
No
**Resolution:**
0.2mm
Infill:
15%
**Filament:** Polymaker ASA
Notes:
-Printed with generic settings on Bambu P1S
-15% Gyroid Infill
-4 Walls
-Mouse ear brim on the outside corners of the bracket and 100C bed
Category: Tool Holders & Boxes