QCTP AXA BXA Bracket System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed a system to hold all of my BXA tool holders and wanted one to mount to the wall behind the lathe.This system…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Needed a system to hold all of my BXA tool holders and wanted one to mount to the wall behind the lathe.
This system uses a piece of 1-5/8 Uni-Strut available from most hardware stores and the AXA or BXA holders clip on and are retained by both the hook and a small 12x3mm magnet pressed in to the back. The wall brackets have printed threads for a ¼-20 set screw in the front to lock the uni-strut in position.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
**Rafts:**
No
Supports:
No
**Resolution:**
0.2mm
Infill:
15%
**Filament:** Polymaker ASA
Notes:
-Printed with generic settings on Bambu P1S
-15% Gyroid Infill
-4 Walls
-Mouse ear brim on the outside corners of the bracket and 100C bed
Category: Tool Holders & Boxes