Arlec Rope Light Solar Panel Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to hold the solar panel for Arlec 10m white LED rope light. This product comes with a stand for the solar…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Bracket to hold the solar panel for Arlec 10m white LED rope light.
This product comes with a stand for the solar panel but mine broke instantly when pushing it into the ground. My backyard also gets very little natural light so roof mounting the solar panel was desirable to maximise exposure to the sun.
Solar panel glass is fully exposed to sunlight, small shelf in the model to keep the panel in place. The panel will be elevated slightly as to not accidently hit the buttons on the back when installing. Everything is fairly snug so the panel should not work itself free and fly off in a strong storm.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
0.2
Infill:
20%
Filament:
Prusament PETG Jet Black
Notes:
Print upside down with supports from the build plate this was sufficient in my print, you could add more if you so desire. Could up the print resolution to 0.3 and would print well and be faster.
Category: Outdoor & Garden