RG35XXSP Slip On Protective Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case that protects your RG35XXSP, and keeps it from opening in your bag.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Printer: Modified Ender 3 V2 with Direct Drive
Material: ESun PETG Black
Nozzle: 0.4mm
Layer Height: 0.2
Wall Count: 2
Infill Pattern: Gyroid
Infill: 40%
I wanted to get a compact case that protect much of the body from scratches, but most importantly, keep the device from accidentally opening inside my bag, getting something inside it, and folding on itself.
I came up with this design in about 4 iterations. It's a pretty tight fit, and I printed with PETG so there's a little flext to it. You could print it in TPU as well I believe.
WARNING
HOWEVER, PLA AND ABS ARE UNTESTED. PRINT IN THOSE MATERIALS AT YOUR OWN RISK. It might be TOO tight of a fit to even get in, and even if you manage to slip it into the case, PLA and ABS not being as flexible as PETG might get it hard stuck inside, even with the push slot I provided at the bottom!