Liczymy pasujące modele…
Print with the flat part of the grip on the print bed with supports. I used a threshold angle of 10 degrees with snug supports! Feel free to get this directly from me here: https://dildesigns3d.etsy.com
I wanted some better ergonomics while I played my games. I remixed the grips from STR to fit the RG35XX. It's a snug fit. Printed in PLA with supports on build plate.
The Anbernic RG35XX H is a retro handheld emulation game console that runs on Linux. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective…
Print this with the top side of the clip down. I printed with supports with a 10% support angle threshold. You shouldn't need a brim depending on your plate, but I printed previous versions with a brim just to be sure! Feel free to get…
In collaboration with HyperPlay RPG , I have designed a grip for the RG35XX H games console. Print with supports 15% infill 0.2 mm layer height See HyperPlay RGP's review of the grip here: I also sell this on my website and Etsy store ,…
This is a simple stand for the Anbernic RG35XX. I was having some trouble with bed adhesion so I added tiny tabs on the corners that are easy to cut off and added that as a second STL file. They are 0.15mm tall so they should only be 1-2…
A comfort grip (for when the device is opened/in play) and a standing case (for when the clamshell is closed) for the iconic Anbernic RG35XX SP. It has access to all the ports on the side and bottom of the device. It can be printed with…
RG35XX Skadis mount Print the model in the default orientation, with supports enabled. You may need to sand down the pegs in order for it to easily fit in the pegboard. I have also included the .step files with and without the pegs, in…
Information about the model: Inside the case there is about 1mm of play on each side so that foam rubber or similar damping can be attached. The lower shell (Part_2) has an elevation so that the shoulder buttons are not pressed in.…
If you like this model, show some love, hit the like button. Version 2 of the ergonomic grip for the Anbernic RG 35XX (RG35XX). Now has rounder corners for comfort and different printing orientation. Print in PLA Needs supports
The Anbernic RG35XXSP is a retro handheld emulation game console that runs on Linux. It's design is boxy and this is for people who want a little bit more grip to the console, but still keep the slim and portable nature of the console. I…
A slip on button and screen cover for the RG35XX Plus. Wide opening for USB-C cable clearance. Print without supports.
A display stand for your RG35XX or RG35XX Plus. Simply place the hand-held in to the stand and it will automatically start charging, so you’re always ready to game on the go! 8.5 mm rubber feet: https://amzn.to/4aqaWQ1 Specific USB-A -…
Love the rugged box model and decided to adapt it for use with my RG35xx I left about 2mm of space all around the device to be able to add some foam padding. For the padding on the face I used the foam that the device was shipped with.…
Clean display stand for this amazing little machine
UPDATE: Included another version of the grip that includes some ridges inside where the device goes. It holds the device much tighter where it will not slide out by accident. It did create some small scratches on the side of RG35XX Plus…
Great grip to help the RG35XX+ more comfortable for longer sessions.
Used PrusaSlicer to customize the RG35XX stand made by jlips. The Anbernic logo is borrowed from the boot logo I'm using for a different look. I also added negative volumes on the bottom for rubber bumpers I had laying around to ensure…
An all 3D printed case for the Anbernic RG35XX Plus. No screws are needed for the assembly. if you a short cable or a fiber cloth you might be able to store it ind the case to :) When printed, just put the lid on and put some 1,75mm…
This case is made of two halves that can be connected with either a length of filament, or the use of #16 finish nails as “hinge pins” to connect them together. The case features a slot in the back to use as a display stand when not being…
These are some custom replacement buttons I made for the Anbernic RG35XX.
Printed in clear PETG. Organic supports, zero interface layers. Big shoutout to JTEE3D for the excellent step file render of the device, it helped a lot! Happy printing! Update: Included .step files for easy modification. Share alike!
Feel free to use this to develop your own accessories!
A simple stand for the Anbernic SP
Print in TPU with supports nice and slow with the flat side down! I used a 10% support threshold. If you want to buy this from me or want to support me, follow this link here: https://dildesigns3d.etsy.com
There are two files, a version that is .8mm thick and a version that is .6mm thick. The .8mm version is almost silent, but the buttons are a little stiff. The .6mm version has a soft audible click, but the buttons feel a bit better to…
DISCLAIMER: Modding your electronic devices can be dangerous, and you may end up damaging them. Use at your own risk. The author of this publication is not responsible for any damage caused as a result of using these models. Protection…
This grip is for the Anbernic RG35XX H, making it more comfortable to hold while you game. Its ergonomic shape helps reduce hand fatigue during long sessions and gives you a better grip, so it’s easier to enjoy your games without your…
I liked the feel of @dildesigns ergonomic grip and the sleekness of @m00nd0gg slide on design , so I hacked them together to create this slide on ergonomic case for the Anbernic RG35XXH. I printed in PETG, 15% gyroid infill, and supports…
Charging dock for the RG35XXSP. Made a bunch of these for the kids in my life this year. Print the front and back in PLA or PETG, and the feet in TPU. Assembles with QTY m4 screws for the feet and snap-together front and back halves that…
I Made a Charging Stand for the RG35XX and RG35XX 2024 with the Orginal USB-C Cable + USB-C 90° and Fleece fixed with Hotglue. USB-C 90° from aliexpress Fleece from aliexpress
This is a grip for the Anbernic RG35xx. It's got long handles for people with larger hands. Edit: Adds a v2 with a stronger grip on the console and a rounded bottom so it doesn't cut into your finger as you play (sorry about that with V1)…
RG35XX H grip, with corrugated surface (plus smooth also) for better grip and less hand sweating. Print Settings Printer Brand: Anycubic Printer: Kobra 2 Rafts: No Supports: Yes Resolution: 0,2 Infill: 15% Filament: Sunlu PLA White Notes:…
Here we have a little front cover for the RG35XX, friction fit, pops on and off, good fit, it won't drop off accidentally in a bag or pocket, not so tight as to put undue pressure on the device. Subtle cosmetic detailing on the front,…
A simple model to fill the holes left when analog sticks are removed. They snap in and sit flush with the front of the device. Check out my profile for versions for the RGB30 and RP2S. Originally tested in PLA, 0.2 layer height, 100%…
I know you always wanted to display your Anbernic RG35XX! Now you have a chance to have very nice stand for your favourite handheld. BUT REMEBER ABOUT THE DUST ABRASION! What I used? Here: Printer: Creality Ender 3 V2 Neo. Nozzle: 0,4 mm,…
Handle for the Anbernic RG35XX Plus
This is a snap case for the Anbernic RG35xx and RG35xx Plus. It's mean to be used with flet lining to protect the device completely. I used 1.2mm x 31.8mm Wire Brads for the hinges. Depending on your printer tolerances, they should be…
Rework off Tomunderwood's Gameboy Advance SP Rugged Case to suit the Anbernic RG35XXSP
Mostly tried to resolve some minor annoyances I was having trying to take good care of the device :-P - Bumper style case to avoid screen sitting flush against surface - Spine along back to prevent easy accidental L/R trigger presses -…
I made them with fuzzy skin in mind, so the tolerances are jank, and you may need to trim the smallest bit off the edge with a razor. I really wanted to make sure the L2 and R2 wouldn't also click the L1 and R1 buttons, and this was the…
Thinner version of https://www.printables.com/model/829340-anbernic-rg35xxh-bumper-case with cutout in the back.
A remix for the ANBERNIC RG 35XX Pro
Mostly accurate reference model for the Anbernic RG35XXH.
Simple remix of the Retro Gaming Handheld Ergonomic Grip by gevo4258 , which slightly adjusts the opening at the bottom so that the grip can be used with the Anbernic RG300 and RG35xx. Can be printed with PLA, but needs support. Mine was…
Print with the flat side against your build plate, supports will not be needed. The case is designed to be used with the foam insert that the RG35XX ships with, I attached mine with a little glue. If you don't have the foam it shipped…
This is a remix to fit the Anbernic RG35XX plus. The original RG35XX is 2cm thick and the plus version is 2.2cm thick.
Perfectly fitting hinged case for the Anbernic RG35XX Plus.
I found that both the 0.8mm and 0.6mm variants of @8BitDrip_2287972 's RG35XXSP Membrane Inserts were too thick, so I used Blender to make an even thinner 0.4mm variant. I find this thinner variant works very well in my RG35XXSP and feels…
Needed a Skadis Mount for my Anbernic RG35xx H. The original model was to wide for the RG35xx H, which is why I remixed it to have a better fit. I just made it about 5mm narrower, it fits perfect now. If you'd like to print the model…
Ikea Skadis holder for Anbernic RG35XX or RG35XX Plus. Charge port is accessible from the bottom. Support needed for middle hook only.
-------------------10/07/24------------- IT HAS BEEN DONE! I figured out the sticking and I think I make it a little better than the first round with the L2/R2 buttons. Check out the V2 of those and let me know if you see anything that…
Description I designed this cover to mainly protect the screen and to be as thin as possible. I did want the RGX35XX to still be very pocketable. About this model: The black and red on the pictures has the first 3 layers made of PETG as…
I removed the text from @soulrider911_26733 's GBA SP stand to have a blank faced version to use for other devices. I then scaled it in the slicer and added text for the Ambernic RG35xxSP.
I just purchased an Anbernic RG35XX Pro and wanted a way to securely carry it in my backpack when I travel. Similar to the original, you'll need six (6) M3 25mm. There are approximately 2mm of space on all the edges for adding padding.
This is for the RG35XX+, I don't think it will fit the original RG35XX. Included the SolidWorks file if anyone wants to make edits.
Hi i designed this simple controller grip for the anbernic RG35XX H. It just fits snug with the console and does not cover the buttons. One has cutouts for the speakers and sd-card slots and the other one has no cutouts.
I made a protective cover for my Anbernic RG35XX H Hand-held. Unlike alternatives this cover allows me to always keep cards with firmwares and games next to the hand-held. Also, there are some minor elements improving overal convenience…
To adhere the logo well, use support in the lettering area.
A little desk holder for an Anbernic rg35xxsp. Print in place.
For use with Nathan Kean's hand grip.
An upgraded version of the previous model.
Designed after the work of IamDroBro (and mb also Emotional-Priority49) on Reddit for the RG35xxsp. This dock suits the RG35xxsp - check your model no. Hardware required: 4x M3x8-12mm countersunk bolts 4x 4.5mm(w) x 5mm(d) M3 threaded…
I couldn't find a stand for the RG35xx plus. So I designed this one in Onsdel (FreeCAad)
Nothing special but displays the SP in your collection.
I made a stand for my Anbernic RG35XXH its super simple but works and should be a pretty quick print.
The model was based on https://www.printables.com/model/1152772-honeycomb-storage-wall-anbernic-rg35xxsp-mount. Thanks to the author @SamuraiLink3. Print settings Support: Yes Filaments: PLA, PETG Fill: 15-20%. Perimeters: 3
I wanted to make sure the screen protector was aligned correctly with my RX35XX Plus, so I made this guide. This should also work for the RG35XX. I attempted to follow these directions (with no stickers) and used a squeegee tool as shown…
Magnetic RG35XX H Case Recently discovered these anbernic devices and they are a game changer! Endless hours of fun in such a small device needs to be celebrated! Created this case so i can chuck the console in my bag without worrying…
Follows the contour of the back of the device to cut down on wasted space. Includes a cutout for the charging cable. It's designed as a single piece with a print-in-place hinge however it does need supports for the back. The front…
This is a display stand for the Ambernic RG35XX+ and the Powkiddy RGB30 hand held retro gaming devices. It should print without supports although if you are having issues around bed adhession, then I recommend a brim or at least mouse…
A simple Gridfinity Bin for the Anbernic RG35XX (Plus). Two by One Tiles. Slight lean to the back.
The initial case design provides good protection and functionality but is large and has a sharp edge at the bottom near grip areas. As a result, I put my fingers in less comfortable positions to not feel discomfort from the sharp edge.…
The RG35XX Plus has a removable battery cover on the back. If it gets lost, a replacement is here.
1x3 Gridfinity bin for the Ambernic RG35XX
I wanted a cover for my Anbernic RG35xx to protect it and make it a little easier to slide in and out of my bag. This cover is intended to re-use the insert that came in your original RG35XX H packaging, but if you're a normal person who…
A simple holder for a favorite retro game emulator.
A friction/stretch fit TPU protective cover set for the RG35XX. Very slim and keeps it pocketable but protects the buttons/triggers Front and back covers work on their own, personally I usually just use the front cover
I modeled out a 3D-Printable insert for the Anbernic RG35XXSP based on the dimensions circulated online. A combination of Multi-Material Printing and patterned build plate allowed me to produce a pretty nice design to put in my handheld.…
Printer : Modified Ender 3 V2 with Direct Drive Material : ESun PETG Black Nozzle : 0.4mm Layer Height : 0.2 Wall Count : 2 Infill Pattern : Gyroid Infill : 40% I wanted to get a compact case that protect much of the body from scratches,…
In case you're a bit slow like me and break the retainer clip while installing better shoulder buttons… I've done the hard part now you can print it and get back to playing.
A grip to help with a little hand fatigue and placement
This is a custom-designed mount for the Anbernic RG35XXSP handheld console, specifically made to fit the IKEA Skadis pegboard system. It’s the perfect way to display your device and keep it safe when you aren't playing. Features: Perfect…
A magnetically-locking hip-mounted belt holder for the Anbernic RG35XXSP retro handheld. It uses a single paper clip for the top cover hinge and magnets on the side to keep the lid in place. There are two options for the type of magnets…
Place bottom of the print on the build plate. Used 0.2 layer height with 10% infill.
Anbernic RG35XX SP RG35XXSP
RG35XX pro Skadis mount Print the model in the default orientation. I printed it in Prusament Prusa Orange PETG. Add supports only for the highlighted areas:
This is a Honeycomb Storage Wall mount for the Anbernic RG35XXSP. There's not much to say about this one, its a simple box that can attach to HSW inserts and holds your handheld securely. Print Settings Support: None Filament: (almost)…
SD card holder for the Anbernic RG35XXSP. Replaces the existing battery cover. VERSION 2.0
A recessed version of the power button for the Anbernic RG35xx. It makes the power button much harder to press on accident.
Just snap mount for rg35xx h to multiboard.
RG35XX SP Battery Cover replacement using original dimensions and fits snugly.
I made a comfort grip for the Anbernic RG35XXSP, as it needs a bit more size for bigger hands. Printed in PETG at 0.2 mm, with support's
Loose-fitting dust cover for your consolized Anbernic RG35XX H. Enlarged, loose-fitted version of "Simple Cover for Anbernic RG35XX H by amd" with an open backside and vents along the edges.
Prints upright with supports under the pegboard hooks
Some minimalist grips for the Anbernic SP (RG35XXSP). Gives your ring finger and pinky something to hold on to, without adding much size to the profile of the console. Still very pocketable. Should be just a friction-fit with the screw…
It's a small remix of Anbernic RG35XX Grip. I added some height and confort.
