RG35XXSP Belt Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetically-locking hip-mounted belt holder for the RG35XXSP. It uses a single paper clip for the top cover hinge.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A magnetically-locking hip-mounted belt holder for the Anbernic RG35XXSP retro handheld. It uses a single paper clip for the top cover hinge and magnets on the side to keep the lid in place. There are two options for the type of magnets you can use. This is based on my similarly designed belt clip for the GBA SP.
Printed at 0.2mm with tree supports. I'm using PETG and a stronger print profile since the built-in clip can snap easily if you're not careful (a problem I might attempt to fix in the future) (also be careful when removing those supports).
Notes:
- The belt clip could be usable without the magnetic top, but I personally wouldn't risk it plus magnets are fun.
- The rectangular vs circular magnet parts should be interchangeable, so you can kinda alter the strength of the build if you have any problems with durability.
Materials:
- PETG/PLA
- 1x Paper Clip (1mm diameter)
- 4x 30x10x3mm Rectangular Magnets OR 4x 10x3mm Circular Magnets
- Superglue