Anbernic RG35XXSP Grip Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slim grip case for the RG35XXSP.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 375
- Wydruki
- 0
- Wyświetlenia
- 1685
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The Anbernic RG35XXSP is a retro handheld emulation game console that runs on Linux. It's design is boxy and this is for people who want a little bit more grip to the console, but still keep the slim and portable nature of the console.
I used PLA+, 0.2mm height, 15% infill, and 3 perimeter. I also tried variable layer lines on the curved areas and they came out great. Supports are needed for the right side of the case.
This is a friction fit case. Installation requires adhesive felt or something similar taped to the inside of the case. In one of my pictures above, you can see I used a thin black felt adhesive on the sides. The fit is nice and tight, but the other option is to use double-sided tape on the inside. There are two squarish slots for for 3M VHB tape or something similar.
Check out my profile for similar cases for other consoles. Happy gaming!