126 modeli
I was informed my previous version https://www.printables.com/model/728282-ergonomic-grip-for-miyoo-mini-plus-multipart-for-m was too big for some smaller hands so I crated this version (and a stand to go with it). Print with brim and…
This case is designed to fit the Miyoo Mini PLUS handheld. It works as a protective case, with a secure latch and a simple hinge mechanism. When used as a grip, the Miyoo PLUS slots into place securely and is held in place by the ridges…
Here are 4 different printable versions of buttons for the Miyoo Mini v2. Dimensions are taken directly off the console and fitment should be close to stock. The Different versions are: Regular flat top buttons for fdm Convex top buttons…
This is my first attempt at a grip/holder for the Miyoo Mini Plus game system. It works well enough straight off the printer that I thought I should share it and perhaps later make a version 2 after I've lived with the grip for a while.…
This is remix from https://www.thingiverse.com/thing:5560308 I totally changed some features of old version. Feature more Comport grip Easy to Assemble ( no need to insert pin) Hold your mini more firmly on GRIP mode. Fix gap between lid…
---------SMALLER VERSION FOR SMALLER HANDS--------- https://www.printables.com/model/737483-ergonomic-grip-for-miyoo-mini-plus-small-version-m ------------UPDATE TO v2!-------------- After some heavy usage I made improvements to the…
Here are 5 different printable versions of dpads for the Miyoo Mini v2. Dimensions are taken directly off the console and fitment should be close to stock. The Different versions are: Regular concave version with arrows (like stock)…
Don't you hate it when you take off your snap case and you've nowhere to put it while you're gaming? Fret not - this screen protector allows you to store it on the back of the device while in use. You'll never lose it, and it still…
This screen protector was redesigned from the ground up to fit the Miyoo Mini Plus (and the original mini), with the goal of making it even more practical with the following new features: A cutout for a mini jack so you can keep in your…
I have created a grip which is exact (scaled a few milimeters up) shape of Game Boy Color
Miyoo Mini Plus mount for the IKEA Skådis pegboard. Should be printed with the bottom touching the build plate, with auto-generated organic supports (only on build plate).
V4.1: The latest version of the Miyoo Mini has changes to the shell dimensions. If your Miyoo Mini has the info on the back printed directly on the shell instead of a sticker, then use the “V4_1” model .3mf file instead of the other STLs…
I made this design which is inspired by the flippable case for the regular Miyoo Mini found here: https://www.printables.com/model/240152-miyoo-mini-minimal-flippable-screen-protector I wanted to make mine flippable as well, but due to…
I think the original version is great. Unfortunately it was too big to store - in my case. The smaller version is too small for my hands. That's why I made an intermediate size based on the PS5 controller. The width of the handle is…
First venture into 3D design and attempted to remix this Miyoo Mini Plus dock with a charging port. It's pretty messy as I'm a complete noob at this so please feel free to clean it up. It works well regardless. Here's the link to the USB…
These are buttons for the miyoo mini v2 with the famous playstation style symbols on them. By default the buttons will spin in place and get misaligned so they will end up looking weird. There are 2 solutions to this issue: The first…
This is a remix of the Rugged box for Skat and Doppelkopf by PointNemo. I've resized it so it can house a Miyoo Mini, but also left enough space at the top to fold my wrist strap inside. Please note - as it's resized bigger, the holes for…
This controller grip is for the Miyoo Mini Plus and should be used with self-adhesive felt. Btw: the grooves/slits are there so the seams are not on the surface of the print. Please use the .stl provided. I have added the open .3mf files…
Intro Simple stands for Miyoo Mini Plus console - minimalistic design and easy to print. Print settings print with 10-15% infill no supports place the model on face (place on face) Updates 1 Aug. Added new stand with a cute “My MINI+”…
Miyoo Mini mount for the IKEA Skadis pegboard
Stand made specifically for the Miyoo Mini Plus (Miyoo Mini +). The divet on the bottom is to protect the SD card that protrudes outside of the bottom of the device from taking on all the weight of the device (flaw with some other…
Starting with callum's Rugged case I made the following tweaks: 1. Remade the face design to not bridge as far. Also can now split into parts to print multicolor. 2. Reworked all surfaces that touched the print bed. No more need to…
Stand / Dock to hold a Miyoo Mini and charge using a UGREEN USB C cable. There are three versions available depending if you want the cable to exit on the left hand side, rear or right hand side of the stand. Printed with PLA and no…
Cute case for miyoo mini plus Wil need supports to print as the front is in 3D : Auto tree supports are good with prusa/orca/bambu slicer (just remove the ones on the D pad, they are useless) Need to be printed standing up as shown in the…
Recently I got a Miyoo Mini Plus to play all my retro games. I got the console in white and started customizing it. The main point was to get an orange - yellow color fade using Montana Gold Spray paints. I found the awesome flip case by…
Just a simple case I designed for the community. Its made to have just enough room for adhesive backed felt.
Start, Select, and Menu buttons for the Miyoo Mini - these took 20 minutes to design.
Print the face of the button down with supports, fan off and as small of a layer/nozzle size as you can. These print super quickly and work pretty well. You may need to snip off a bit of the stalk length or use a deburring tool to smooth…
-----------UPDATE TO V2-------- Stand For Ergonomic Grip For Miyoo Mini Plus. https://www.printables.com/model/728282-ergonomic-grip-for-miyoo-mini-plus-multipart-for-m
This is the Miyoo Mini snap cover designed by /r/lordubbe on Reddit just with a Nintendo style logo added.
Simple remix to add the Miyoo logo on the front and the back.
A reversible case for the Miyoo A30 emulator, just flip the case around to protect the screen while slipped in your pocket. The case should snugly hug your device with no modifications necessary, however if desired an inner liner can be…
I designed this stand for my Anbernic RG405V but I do believe this would work universally for any Gameboy styled handheld retro gaming device or cell phone. It also includes a cut out for a power cord to come up through the bottom. It was…
Simply, I just wanted a Miyoo Mini Plus case with a nintendo logo. lol
Support is needed for the bottom and top clips. Edit: Jan 17th, 2024 added variant with charge port clearance to charge inside the case
Simple faceplate replacement. I used this as double sided adhesive: https://www.amazon.com/gp/product/B019OQ4ZG0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I printed both at 0.1mm layer height and did additional wet sanding (1000 &…
Miyoo Mini Grip (for large hands) - Printed in TPU this makes for a great guard against bumps, and feels great in big hands, you'd be surprised how much you use the pinkie rest…
Print with the logo touching the bed. No supports.
Print on its side flat at 100% infill for maximum strength and to avoid snapping inside device.
I enjoyed the original design of the stand but wanted it to fit the smaller size of the standard Miyoo Mini device. I printed mine with the same settings outlined in the original designers description: 20% infill, no supports. Still has a…
Do you love your Miyoo Mini, but sometimes wish it was just ever so slightly bigger and more comfortable to hold? Me too. So I got my calipers out and measured my old Gameboy Pocket, and designed a grip to slide the Miyoo Mini into. You…
Really basic Miyoo Mini V2 charging stand made for the following magnetic USB-C cable (but I guess it should be compatible with some other brands as well) : https://www.amazon.fr/gp/product/B09CD3LHJZ/ The assembly should be a tight fit,…
I read a comment on the original file, and I had like 3 minutes to spare. I haven't printed this myself, since I made the original one, but it should be fine.
I designed this since existing cases can't fit a MM+ with a sleeve, including the official MM+ case! Originally Printed using PLA+ Includes a charging port, a lip to lift up the case, and a nice little decal on the lid! Uses 6 6.5x1.58mm…
Update 1.2: Made some minor changes to the TPU Insert parts. They should now be printable and a perfect fit for everyone / Ich habe ein paar kleine Veränderungen an den TPU Einsätzen vorgenommen. Sie sollten jetzt von jedem gedruckt…
Charging dock/stand for the Miyoo Flip console made to work with the USB A-C included with the device. It's not perfect by any means but I couldn't find anything suitable so I decided to whip one up. You can display the device unfolded…
grip for one-handed use Can be used lying down
Should be printed standing up (the stl - you can stand or sit while printing)
A simple cover for the grip case. Snaps into place.
Mod that replaces the LED cover of the Miyoo A30 so you can attach a lanyard strap to the device. Is really strong, I haven't had any issues with mine! Use this teardown video and go to the point at which you remove the front off the…
I love the design of the original model but when it's being used as an extended grip, the console can easily move and fall off. I added tabs that holds the console in place when using this as a grip.
Cut some dollar-store craft foam to sit in the screen area to protect things and then stick it down with some double-sided tape. No supports needed. Printed quickly at 0.32mm layer height with 20% infill.
This is a simple stand for your Miyoo Mini V4. I created two versions: one plain version that does not accommodate a charger but is slightly more compact as a result and a second version that accommodates just about any right angle…
Joshua C really reached up and slapped the face of god with their Miyoo Mini Gripcase design. it's a Case it's a Grip it's a GripCase. Perfection. …well, almost, because when used as a travel case, Joshua C's gripcase leaves the L1 and L2…
This is a clean design for a Miyoo Mini stand. I couldn't find any that I found aesthetically pleasing so I made one myself. I'm sure people will want to make a hole in the bottom so it can charge in the stand, but the reality is that I…
A Simple TPU Miyoo Flip Case! A simple Miyoo Flip case, print in TPU with supports for the bottom piece and enjoy! NOTE : This case is mostly for looks and feel because it can not cover most of the corners because of the triggers and the…
Please subscribe to my YouTube channel if you enjoyed this model! This model is a rough mockup of the Miyoo 355, based on the available renders. Check out the 355 thread in the Rumor Mill forum on the Retro handhelds Discord for more…
Created these to use enamel paint (like an enamel pin) to give a little life to the box. Enamel came from Michaels (USA Hobby store), Brand: Testors Printed with ABS, 100% infill with organic supports.
I really liked the Miyoo Mini stand that Defined Vector Design created, but unfortunately it seems Ugreen has changed their cable design, the one I bought on Amazon did not fit with Vector Design's stand. So I took inspiration from that…
This is my version of a Miyoo Mini mount for the Honeycomb Storage Wall system. Print it as you like with your default settings. I always used ABS, 3 Walls, and about 15-20% cubic infill and a 0,4-0,6mm nozzle. Prints without support.
Im not the best designer but it works so not as pretty as others. Feel free to remix and improve. Does what it says on the tin. Printed in bambulab orange pla basic with default settings on the X1C no supports needed.
The Miyoo Flip is a retro handheld emulation game console that runs on Linux. It's design is boxy and this is for people who want a little bit more grip to the console, but still keep the slim and portable nature of the console. I used…
This is a charging stand for the Miyoo Mini V4 which incorporates the VAFOTON USB C 540 degree rotating Magnetic Adapter. Link: https://amzn.eu/d/7y1DhfG
Low Profile Buttons for the Miyoo Mini Plus. (Also fits the Miyoo Mini v4, but worse) I printed them in resin, traced the symbols with a pen and put a drop of resin on top. Theres also a blank version without the symbols if you don't want…
Button for miyoo flip handheld. Only one peg so it can be used in any place. Extra long peg to help with prinitng, will need to be clipped flush with the button to fit. Please feel free to improve and remix.
A charging dock for Miyoo Mini with the Miyoo logo added for aesthetics. Remixed from an excellent design by Lyrkan and has been in use for over a year with no issues
I printed this flat with organic suoports.. 0.12 layer 0.20 first layer. It was suggested to print this vertically….
Prints upright with support under the pegboard hooks
I had previously designed a charging dock for my Miyoo Mini V4 that used a Ugreen charging cable. But, after designing this charging dock for my TrimUI Brick , I decided to reuse that same 2-part design to create a dock for my Miyoo Mini…
The Miyoo A30 is a fantastic little pocket handheld, but its slim, flat body isn't kind to your hands during longer sessions. This grip fixes that — it adds real thickness and contoured shoulders to hold onto, turning the A30 into…
A grip for the Miyoo Mini Plus (MMP), based on the DualSense PS5 controller, which I find very comfortable to hold. Two distinct variations are provided, Comfy and Roomy: The Comfy variation sacrifices access to the bottom 3.5mm jack,…
Nothing much to say, I realized that my version of the Miyoo mini Plus does not have the battery clip like it is on the awesome design from the original creator, if you got the newer Revision of the Plus model that utilizes a countersunk…
As with the original this is designed to work with the cable that comes with the device. This is for the Miyoo Flip, not the mini. In the image is a Flip V2, but should work with the V1. I added walls and tightened up a bit for a more…
Low Profile Buttons for the Miyoo Mini Plus. (Also fits the Miyoo Mini v4, but worse) I printed them in resin, traced the symbols with a pen and put a drop of resin on top. Theres also a blank version without the symbols if you don't want…
Similar design to my Miyoo Mini Plus HSW mount , but now for the Miyoo Flip! Generally the same design but with rounded tabs instead of square ones for easier printing.
A quickly knocked together grip for the Miyoo Mini Flip. Held in place using the two screw holes at the top of the console and easily removable. The power and volume buttons and SD card are accessible. Print standing up, support is…
I was informed my previous version https://www.printables.com/model/728282-ergonomic-grip-for-miyoo-mini-plus-multipart-for-m was too big for some smaller hands so I crated this version (and a stand to go with it). Print with brim and…
Recommended Use: Resin Printing Includes: DPAD ABXY Button Select/Start Button Menu Button Power/Reset Button Volume Button Shoulder Buttons (L1, L2, R1, R2) ⭐⭐⭐ IMPORTANT NOTE: For personal use ONLY If used for commercial used legal…
This gridfinity bin lets you display your Miyoo Mini Plus along with two SD cards and anything with a 3.5mm audio mini jack. Features: Snug fit along all edges - your retro companion can't slide off in any direction. And yet the…
A (not so easy) print for a grip case for the Miyoo A30 This print requires exceptional bed adhesion. I use a BIQU CryoGrip plate at 50 degrees celsius. This may not print well on a standard PEI bed, and does not work well with bed…
Use this case to store your Miyoo A30 safely so you can chuck it in your bag without caring! Use a different build plate to modify the texture and look of the case This case needs 8 10mm x 5mm x 2mm magnets, superglued into the slots.…
This is a case for the miyoo mini plus with magnets to hold it closed. The case is printed in an upper and lower part and then the hinge can be pressed together. The case utilizes 4 10mm x 3mm x 20mm (actual dimensions of the ones I got…
This is a Charging Dock for Miyoo Mini Plus. I used Mako 180 Usb C Adapter. You might have cut the Excess Rubber on the Corners. But im not sure if it matters or not. https://www.amazon.com/dp/B0CGHTXGRT With a use Cable Matters L…
print it with good settings. don't use bad settings, as that will likely lead to bad results. be sure to use printing material. also, and this is critical… I can't do CAD so this model is crap, but very usable.
This is a custom-designed mount for the Miyoo Flip V2 handheld console, specifically made to fit the IKEA Skadis pegboard system. It’s the perfect way to display your device and keep it safe when you aren't playing. Features: Perfect Fit:…
This is a custom-designed mount for the Miyoo Mini Flip handheld console, specifically made to fit the IKEA Skadis pegboard system. It’s the perfect way to display your device and keep it safe when you aren't playing. Features: Perfect…
A Simple TPU Miyoo Flip Case! The Miyoo Flip will still fit in its original carrying case with this case on. You will have to print the bottom piece with supports but the top piece is fine without them. Depending of you printer or the…
As with the original this is designed to work with the cable that comes with the device. This is for the Miyoo Flip, not the mini. In the image is a Flip V2, but should work with the V1. I added walls and tightened up a bit for a more…
Similar design to my Miyoo Mini Plus HSW mount , but now for the Miyoo Flip! Generally the same design but with rounded tabs instead of square ones for easier printing.
A quickly knocked together grip for the Miyoo Mini Flip. Held in place using the two screw holes at the top of the console and easily removable. The power and volume buttons and SD card are accessible. Print standing up, support is…
Larger version of my Miyoo Mini Flip grip to fit the Miyoo Flip V2. Held in place using the two screw holes at the top of the console and easily removable. The power and volume buttons and the USB-C and headphone sockets are accessible.…
I made this because I couldn't pick which handheld to get and I wanted to know if this (very small!) one was comfortable for my hands. It makes for a nice model to jsut have around though, looks and feels very nice. Details All…
I dont own the real one (yet) so I cant exactly testify for the 100% accuracy in size and shape, but apart from the positioning of the menu button (insignificant for any use case I can think of) and slight inaccuracy in start/select…
Keeps the device pocketable, and protects the screen from keys, coins and whatever else you got in them pockets of yours! Print face down, supports needed for the small overhangs!
Imported albert128's STLs into Fusion360 and did a quick and dirty edit to change the screen border to a solid bar with chamfer and filled the holes I'm not using in a single piece print. All parts parts are merged into a single piece for…
![[Miyoo Mini] Start, Select & Menu Buttons](https://media.printables.com/media/prints/341687/images/2914695_30f1f50f-aeaa-4a92-8861-6a34295a3b53/miyoo_buttons_0.png)
