Magnetic Case for Miyoo Mini Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic closure case for the Miyoo Mini Plus
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case for the miyoo mini plus with magnets to hold it closed. The case is printed in an upper and lower part and then the hinge can be pressed together.
The case utilizes 4 10mm x 3mm x 20mm (actual dimensions of the ones I got are 9 x 2.6 x 19 though) to hold the case closed. The magnets create a secure closure but still allow for easy opening of the case.
During printing you should pause at the layer height before the magnet inserts are closed over and insert magnets. Make sure you insert the magnets into each piece so that they attract when the case is closed. I printed in PLA with a .2mm layer height and 4 walls.
There is a small amount of space around the edges of the device for adding some soft felt or other material to securely hold the game when closed.