P
Printables
K1C/K1/Max Close filament spool
if you use any enclosure or filament dryer this will be very simple and effective solution to close your printer spatially if you print ABS or similar material
Wyniki wyszukiwania: close
Liczymy pasujące modele…
P
Printables
Overhead Spool Holder For Closet Rod
Oldie, but goodie! @fargo3dprinting made in 2015. I'm still printing them! Excellent model. Author's original recommendation: Print at Standard (0.2mm) layer resolution, 50% infill, no supports. I'm able to print with 0.3mm layer and 15%…
P
Printables
Single rod closet wire shelving bracket (openscad)
The original model looked great when the other half saw it, and wanted some for the closet. After quickly realizing that our builder selection had only a single top support rod instead of 2, I closed off one in the slicer to test. Close…
P
Printables
URBI splited for V0 print size with closed led strips wire channels with ecas fitting
remix of the previous version closed off the cable channel more and added an ECAS option + tried making it editable again for the connecting hexagon refer to the original
P
Printables
Molle GoPro Strap Mount - Closed Strap Mount
GoPro mount for backpacks. This particular design was made on request, it has a closed strap mount. There are two models Landscape and Portrait that rotate the orientation of the mount. The name is for identification mostly, it takes the…
P
Printables
Closet Rod Holder - Build your own wardrobe
Intro A versatile and functional 3D-printed rod holder designed to help you build custom wardrobes, closets, or storage racks . This model serves as a sturdy mount for a closet rod or clothing rail — just print, assemble with two pieces…
P
Printables
Closet Rod Bracket - More fill
I modified the original bracket by increasing the back section as I need more fill for my closet rod to get into both sides of my closet.
P
Printables
Sliding Closet Door Latch
My cat kept sliding open the closet doors in my office and knocking all my filament off the shelves so I made this simple latch to keep them shut. This is a small, quick print designed to hold sliding closet doors in place. It installs…
P
Printables
Pendrive Encloser | Module encloser
Ready to print pendrive encloser | Electronic module encloser for bluetooth dongle and pendrive
P
Printables
Clip for food in the bag, close on the bag
Hello, Today I have a Food Bag Clip for you, a bag seal. It is suitable for sealing food against air. Food will then stay fresh for a long time. I used PLA/PETG Basic as the material No need to use supports If you are interested in my…
P
Printables
Print-in-Place Banana Hair Clip (Remix) – Closes More Tightly
This remix of the Print-in-Place Banana Hair Clip is designed to close more tightly, making it ideal for people with less hair volume. Based on the original model, but optimized for a more secure grip. I printed in PETG, no support,…
P
Printables
Lexar SD Card Reader Encloser
Was a bit tricky to model due to its odd shape. Printed on a PRUSA Mk3s. It can be printed using minimal supports on critical areas only but i got best results with supports everywhere (SNUG) It requires six nuts (M2 1.68mm thick) to be…
P
Printables
GoPro Hero 8 Black Mount For FrameX Battery Door Closed
GoPro Hero 8 Black Mount For FrameX - this has the side door closed off to prevent loss of the battery door - there is a cut out to push the gopro back out
P
Printables
Prusa CORE One/+ MMU3 Y-Splitter FESTO (compatible with Enclosed version)
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…
P
Printables
Prusa CORE One/+ MMU3 Y-Splitter COLLET (compatible with Enclosed version)
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…
P
Printables
TopPanels to close the gap for Modular 10inch Server Rack
Some Top Panels to fully close the gaps in the Modular 10inch Server Rack when using the topper and Handles. The standard is always 3mm thickness. But if you are usind the Multiboard Add-On, then you will need the wider 6mm frontpanel and…
P
Printables
Guide for sliding closet door
We have sliding closet doors from the 70's they small track on the bottom broke and a tried to recreate it. I printed it in PETG
P
Printables
Baofeng 5RM/5G PTT Lockout Closed/Open (fits pro plus variants, uv5g k5, f8hp)
Removed volume guard added PTT lockout 3 styles I found out that the AR-5RM models have a very touchy PTT and I couldn't find a suitable model to print so I modified this one edit 3/26/2026 Added 12 variations Added a cage and a full…
P
Printables
Wago 221 Storage Box-Lid Closed
Original lid model found in files section of model Wago 221 storage box by Tijnoz I really liked the original lid design for the wago storage box however I work in a rather dusty environment. So I modified the original model to have a…
P
Printables
Creality K1 & K1C Lid Gap Fill Top Cover Hole Close
Improved version of the K1 and K1C cover seal. Added an additional wire channel.
P
Printables
Closetmaid Shelf Hook(able) Container
Made a container to hold small items on the shelf. In this case, I wanted to hold Sharpies with their tip DOWN so that's what it holds. I printed this out of TPU to have some flexibility so I could hold the markers even if they are a…
P
Printables
Poop bin fully closed (P1S)
I found this design elsewhere, but the original 3D model quality was poor. I rebuilt it from scratch and increased the depth. STL and STEP versions without magnet holes are included, so the model can be easily modified for the magnet type…
P
Printables
Closet Rod Support Bracket
Designed by myself in OnShape After moving into a new house, I noticed that with all of my clothes hung in my closet, the middle was starting to sag. I designed this bracket to screw into the shelf above the rod in order to relieve some…
P
Printables
Modular Hanging Filament Spool Rack (Curtain/Closet Rod)
This is my remix of the original filament spool hanger, updated into a modular “rack” system so you can build one row or multiple rows of hanging spools on a standard closet or curtain rod . It’s intended for common up-to-1kg filament…
P
Printables
Cat litter tray door for pets at home essentials enclosed litter tray
Cat litter tray door for pets at home essentials enclosed litter tray, not exactly the same as the original but compatible. may require slight trimming depending on wear of holes on original
P
Printables
Closer for overlapping curtains
The blackout curtains for the sliding door at the condo kept gapping open, letting the sun to get into our eyes. I could not find a solution online, so designed this one. One of the pictures shows the print from the outside, the other…
P
Printables
Lego Compatible (67695.dat) Technic Axle Connector 2 x 3 with Ball Socket Closed Sides
This model is compatible with the lego system.
P
Printables
Lego Compatible (67696.dat) Brick 2 x 2 with Axlehole and Ball Socket Type 4 and Axlehole with Straight Closed Sides
This model is compatible with the lego system.
P
Printables
CH1-C DIY Closed back headphones
Headphone design based around the Peerless Tymphony 50mm driver. The project is an experiment in closed-back cup design, I wanted to test out an idea I had of using 3d printed infill patterns to control resonance within the cup, rather…
P
Printables
(Closed for now, but put your avatars in and i will make it after summer) Yourself C00lkidd From Forsaken, Your Roblox Avatar!
Put in the comments an image of your Roblox avatar and a name, and i will try my best to make a figure
P
Printables
Model of a cube with closed spatial polyline on its surface
Model of a cube with an edge length of 4 cm. A closed spatial polyline is created on the surface of the model of a cube.
P
Printables
AERECO ALD ZUROH 100 MD retrofit lever for manual open/close
Retrofit for the AERECO ZUROH 100 MD moisture-controlled external air vent or as spare part for the ZUROH 110 MD with lever. The lever in combination with drilling a hole into the cover converts the ZUROH 100 MD to the ZUROH 110 MD and…
P
Printables
Double Hook for an Oval Closet Rod – Handbags within reach
A simple double hook that hangs over an oval closet rod to instantly add two extra hanging spots. Perfect for keeping handbags off the floor and easy to grab. Description A clean, practical organizer for your wardrobe: just slide it onto…
P
Printables
Lid Riser for AD5M Minimal Encloser
Minimal enclose top lid riser. I do not know if this works on the regular enclosure from Flashforge.. Only made for the front of the machine by the screen.
P
Printables
Soft Close Drawer Slide Rear Mounts
Soft Close Drawer Slide Rear mount. These are mounts that allowed me to use these slides ( https://a.co/d/0iB0Np1V ) and mount them to the existing mounting holes of the cabinets from the original drawer slides.
P
Printables
Closet Rod End Cap Stop
Tried a model. Didn't fit well and didn't hold up to my kids pounding it on the closet rod with a rubber mallet! So designed one that works better! :-)
P
Printables
Prusa CORE One/+ MMU3 Y-Splitter Prusa Fitting M5-4 (compatible with Enclosed version)
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One/+ and the MMU3 Enclosed version. Since the length of the…
P
Printables
Clothes Dryer Door Close
Perfect for Whirlpool, Indesit and Bosch Clothes Dryer. Clothes Dryer Door Close © 2026 by Bernardo Piteira is licensed under CC BY-NC 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc/4.0/
P
Printables
Hanger hanger/hook for closet / wardrobe
This simple hanger fits on my closet doors and allows for hanging a hanger on the outside of the closet (in two different ways or for just hanging clothes directly on it. Very convenient. I made the design a couple of years ago and never…
P
Printables
Rod Wall Holder, close to wall 22 mm diameter rod, adjustable!
Rod Wall Holder, close to wall 22 mm diameter rod. I needed a rod holder that is closer to the wall. Feel free to remix.
P
Printables
Closet Laundry Hook
A strong hook for hanging a laundry bag in a closet or where ever you want
P
Printables
Snap close container (right and left turn available)
this is a simple hopefully water proof container that can fit matches and so much more
P
Printables
Heavy Duty Solder Fume Extractor CLOSED bottom plate + front panel w/o switch hole + base with 11.5mm DC jack hole
Here are three remixed parts for the famous heavy duty solder fume extractor
P
Printables
Lego Compatible (57878.dat) Train Wheel with Closed Centre for Wheel Bogie
This model is compatible with the lego system.
P
Printables
Lego Compatible (57877c01.dat) Axle 5 x 100 LDU with Two Train Wheels with Closed Centres
This model is compatible with the lego system.
P
Printables
Prusa COREONE to COREONE+ MMU3 enclosed version automatic vent upgrade
Update: works with Firmware Version 6.5.3, my impression is the autovent works a little smoother now. The testfile has to be renamed to .gcode and works for the CoreOne+ but is your own responsibility. The stock top cover of the enclosed…
P
Printables
Closet wire box rail support
I made the model to cloth closet wire box which had problem of all the time removing rail. Now the rail stays on place on this attachment and M4 bolt attached to it. On the pictures the grey part is the old and the orange is the new one…
P
Printables
Pokéball (OPENS AND CLOSES)
A fully 3D-printable Pokéball model featuring a functional hinge mechanism that allows it to open and close. Designed with accurate proportions and a smooth, seamless fit, this model is perfect for collectors, tabletop gaming, or display…
P
Printables
25mm thick closet blinds/bifold/french door magnetic catch
I converted a 25mm thick closet bifold door to french doors by duplicated the bifold hardware on both sides (I didn't want to mount hinges). I made this door catch to keep the new french doors from swinging too far inward as well as…
P
Printables
Food Bag Sealing Clips, Various Sizes, Chip Bag Closer, Airtight - 3D Printable STL File
Clean up your setup with this perfectly-fitted Food Bag Sealing Clips, Various Sizes, Chip Bag Closer, Airtight Seal Design Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
P
Printables
Flip-Top Case for Reading Glasses Remix, enclosed magnets
I made this with ELEGOO PLA and magnets of 6mm x 3mm Printer settings: 0.4 mm nozzle 0.2 mm layer height 15 % filling Gyroid 3 walls No support Make sure to add a pause in your slicer For the lid pause at layer 182 For the case pause at…
P
Printables
Soft-close damper for IKEA Bestå
3D printable replacement plastic part for a soft-close drawer mechanism. Restores smooth closing if the original insert is cracked or broken. Recommended material: PETG or ABS for durability.
P
Printables
Tag Signature Closet Rod Joint
You'll still need to set the joint on a hanger, but this will keep the two pieces joined
P
Printables
Closet rod bracket for 33mm wooden rod - with or without holes for Vedum wardrobe.
Brackets to hold a 33mm rod (or any other dimension with changes to included step file). I needed it to fit within a vedum wardrobe that had 5mm in diameter holes and 32mm cc between holes, so I added some pins that can be printed…
P
Printables
Anti-Peek Keyhole Cover (Gravity Auto-Close)hole cover
Many door locks have oversized keyholes. Even with a key inserted, there is often enough clearance to see inside. Without a key, visibility is unrestricted. This is a direct privacy issue. This is a minimal, gravity-operated keyhole cover…
P
Printables
a chain link with holes offset closer to the center at the top
нарисовал дополнительное звено цепи со смещенными ближе к центру отверстиями сверху. Это позволило установкой всего трех звеньев в начале исправить ситуацию с провисанием цепи, теперь цепь не задевает за верхнюю часть корпуса. I drew an…
P
Printables
Under shelf , back of closet, space saving holder/hanger for ties/belts etc
Minimalist, under-shelf hanger. It holds (at least) 20 ties and/or belts etc in the gap between your hanging clothes and the back wall. It clips onto standard 13mm (Vedum-style) shelves (step file included if you need other dimensions).…
P
Printables
Sidekick64 Cartridge Case: 4 LED holes and closed jumper holes at upper side
This is a remix of the upper side of the nice Sidekick64 Cartridge Case by bigby. I have added 2 more holes to see all 4 LEDs. Further I have closed the jumper holes at the front. Since I use my Sidekick64 only with a C64 I saw no need to…
P
Printables
Bicycle Helmet Mount/Hook for the side of a Cabinet/Closet
A simple Mount for your Bicycle Helmet to VHB Tape onto the side of anything really, i put mine on the side of a Cabinet. Easy to print, put up and use. Used PLA but should work with anything rigid.
P
Printables
Kogoro Mouri - Case Closed - Detektiv Conan - Funko Pop
Funko Pop Modell von Kogoro Mori aus der Anime Sendung Detektiv Conan. 10cm Hoch auf einem Sockel.
P
Printables
Prof. Agassa - Case Closed . Detektiv Conan - Funko Pop
Funko Pop Modell von Prof. Agassa aus der Anime Sendung Detektiv Conan. 10cm Hoch auf einem Sockel.
P
Printables
Ai Haibera - Detective Conan - Case Closed
Eine Funko Pop Figur von Ai Haibera aus der Serie Detektiv Conan. 10cm auf Sockel.
P
Printables
Heiji Hattori - Detektiv Conan - Case Closed - Funko Pop
Eine Figur von Heiji Hattori aus der Serie Detektiv Conan. 10cm auf Sockel.
P
Printables
Kaito Kid - Detektiv Conan - Case Closed - Funko Pop
Eine Figur von Kaito Kid aus der Serie Detektiv Conan. 10cm auf Sockel
P
Printables
Kommissar Megure - Detektiv Conan - Case Closed - Funko Pop
Eine Figur von Kommissar Megure aus der Serie Detektiv Conan. 10 cm auf Sockel.
P
Printables
Ran Mouri - Detektiv Conan - Case Closed
Eine Figur von Ran Mouri aus der Serie Detektiv Conan. 10 cm auf Sockel.
P
Printables
Wataru Takagi - Detektive Conan - Case Closed
Eine Figur von Wataru Takagi aus der Serie Detektiv Conan. 10 cm auf Sockel.
P
Printables
Minimalist Luxury Wood Belt Hanger - Space Saving Closet Organizer
Features Space-Saving: Vertical stacking keeps your closet clutter-free. Easy Access: Open slots for quick selection and storage. Sturdy Design: Optimized thickness to support the weight of heavy leather buckles. Modern Aesthetic: Looks…
P
Printables
Automatic open/closed servo motor vent fan
Servo controller to control a servo in two positions. Input is via 5V for servo power and 5-12V signal to position the servo. When signal is present, servo moves to 0 degree position, when signal power is removed, servo returns to preset…
P
Printables
U.S. Coin Holder and Organizer Fully Enclosed
This fully enclosed U.S. coin holder securely stores your pennies, nickels, dimes, and quarters. You can leave it upside down and vigorously shake it; your coins aren't going anywhere. This coin container and organizer has a screw-cap lid…
P
Printables
Door Closer Rods & Screw Holder
Designed to complement the style of this common spring-loaded door closer, this part will hold both the retention and tensioning arms when the door closer is not in use. It mounts using a command strip placed into a recess to ensure it…
P
Printables
NFC RFID Tag Keychain case/holder – Enclosed Design (25mm insert)
This model is a functional protective case for standard circular NFC tags (stickers or discs up to 25mm in diameter). The keychain is designed for embedding the tag during the 3D printing process, ensuring it is fully sealed, waterproof,…
P
Printables
MTG Deckbox with Sliding Lid (Easier to open/close)
I have two younger boys who want to be like their big brother, so they have a handful of magic cards and some tokens. The deckboxes I've made in the past are too difficult for them to open or store their cards in. This is a simple sliding…
P
Printables
Closed spool for wire/rope
The bobbin is made of two parts that glues together, the bobbin cover needs to drill a hole according to the used wire diameter (or additionally ad in slicer) to thread through the wire. Glue the bobbin pieces together, drill the hole to…
P
Printables
Anycubic kobra X purge bin guider (closed exit)
this model is designed to reduce the filament purge shoot velocity and point the purge towards the purge bin. the speed is resudes by a chain of walls inside the mount.
P
Printables
BentoBox v2.0 Carbon filter for Bambu Lab X1C, enclosed P1P & Voron Trident & others?
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
P
Printables
rubber band based automatic door closer
I was searching for an easy and silent door closing mechanism to save some energy during the winter time. My cats dislike the sound of the models run by rope and a weight so I tried to find an alternative solution. Have two of these…
P
Printables
Card Inserts for Closet Storage (50mmx100mm or 2"x4")
Simple organizer insert with dimensions of 50mmx100mm or 2"x4". I downloaded EB Garamond which looks particularly nice in bi-color. I added a layer change about half-way up (see attached GCode) and put some of the common organizer labels…
P
Printables
Pimp my Toothpick "Closed Rose"
A simple way to spice up the Valentine's dinner. I recommend 0.12 mm layer height. You can find the open rose here: https://www.printables.com/de/model/758217-pimp-my-toothpick-open-rose You can also take a look at my other "Pimp my…
P
Printables
Closet Hook
A double hook I made for inside my closet. It fits over a rod with a diameter of 20 mm.
P
Printables
Train close coupling heads-ROCO H0 1/87 / Kurzkupplungsköpfe mit Vorentkupplung-ROCO / Krátké spřáhlo-ROCO
Jedná se o zjednodušenou napodobeninu spřáhla ROCO.
P
Printables
magnet pantry door closer
A simple support to hold a magnet to make the furniture door stay close in my bathroom. I guess the magnet can be found
P
Printables
Closed counterscrew and a shorter screw
For a cleaner look, I closed the counterscrew and shorten the screw for single-joint connections.
P
Printables
closet strut / entretoise pour placard
English : I designed those little struts that I usually broke. Printed with PLA material with 30% infill at 100mm speed on my elegoo neptune 3 pro. There are both left and right side strut in the file so you have only to print in in one…
P
Printables
Closetmaid Shelf Hook
Purpose: This hook is designed to allow items to be stored/hung in-front of Closetmaid shelving. Overview: This object is a remixed version of the Shelf hook for boxes by siderits. The major changes from the original are as follows: Hook…
P
Printables
Sennheiser HD600-series closed caps
The existing grills can be pulled off and re-attached without any problems, at least in my experience. They're held in place by an adhesive that is still sticky. So you can try this mod without any risk of damage or without any permanent…
P
Printables
40x40 Fan holder for HEPA filter to DIY ikea encloser
Added magnets for HEPA filter for 3D printer Flashforge Adventurer 3 Holes for button magnets 5mm x 2mm Used neodymium magnet 4mm x 1,4mm
P
Printables
Wire Rack Label Display for Closets
Slap on a label, clip this to your wire racks, and have the most organized closet around! Printed with grey PETG (because it was already loaded - PLA will be fine) @ 25% infill. Labels printed with a small thermal label printer (the…
P
Printables
Closet Rod Mounting Plate
Why does this exist?: I needed an extra pole in my closet, so I found an original one second-hand. But it did not come with the mounting hardware. I measured the rod and made this simple design in Fusion 360. I know this is a 'niche'…
P
Printables
Closet Door Ball Catch Shim (2mm)
I had some closet doors that weren't staying shut. I tried bending the hinges to angle the door up, but they kept sagging back down and again wouldn't catch. So instead a sketched up a shim that fits between the strike plate and the door…
P
Printables
Organized Living Closet End Cap
My apartment was missing the end cap to the Organized Living closet pole which was leading to hangars falling off unintentionally. Designed this replacement part to go over the end cap and look like the other end. Ended up adding a 6.5mm…