Bambu Lab P1P closed side panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Please read the Description. These are closed side panels for the Bambu Lab P1P. Upgraded original files from Bambulab.
- Ocena
- 5 / 5
- Polubienia
- 144
- Pobrania
- 1325
- Wydruki
- 2
- Wyświetlenia
- 14 011
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Unfortunately my P1P is not coming until January, so I can't fit and check the parts yet. It would be good if someone could print and install them so we can check the fit.
Important Update: 23.01.2023.
Printing these Files is complicated. ABS/ASA/PETG all failed because of Warping, the parts are to thin and large. Even with my X1C i had no success. PLA is not a reliable Material because of the temps inside the enclosure. I don't think this project will work out. You can use the Remix made by Hobo4ssassin for the Side panles (Hinges for the door missing).
https://www.printables.com/model/365821-p1p-enclosed-sides-armor-modplate
But I cannot guarantee success if you start this project. Consider it as BETA.
- Print the parts individually in the best case
- Use supports
- 15-20% infill
- ABS/ASA
I will also print and update the parts if there are problems.
| Part | Fix | Note | Date |
| Added STEP File | 29.12.2022 | ||
| Left Panels | Complete Rework | 09.01.2023 | |
| Right Panel | Complete Rework | 09.01.2023 | |
| Added Backplate | 09.01.2023 | ||
| Left Middle Top | Position of screw insert THX @Hobo4ssassin | 10.01.2023 |