Liczymy pasujące modele…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop I used a random number generator to help pick the heights so I couldn't fall into any patterns. Sized to print on Mini+
So I'm trying out a concept with this design - which featured in my OLED model here: https://www.printables.com/model/1172417-gridfinity-1x1-oled-display-ssd1306 I have added 2 layers of ribs around the bin. These will ‘click fit’ a 1mm…
The original cube background panels look wonderful, but I really wanted panels that assemble into a cube and I also wanted to spend less material per panel. So I made my own version. Simply print three or four panels and slot them…
Here's how to build a simple RGB LED cube using cheap 8x8 WS2812 / Neopixel LED panels. The design is a single 3D printable piece, printed four times, that screws to the panels and forms a frame to hold them in place. Parts Needed: 4 x…
These are border pieces for the photo background panels by @TripleGWorkshop which allow for a gap-less box when creating a photography background using their panels. Set includes three varieties of edge-strips to avoid visual repetition…
The original Polydron panels consisted of triangles, squares, pentagons, and hexagons, all with identical side lengths, which cleverly interlock to enable construction of various 3-dimensional shapes. (See e.g.…
Why? I overhastily ordered my VCore 3 500 side panels with the standard dxf's provided by RatRig, ignoring, that I won't use the standard LAN sockets, so there was this rectangular hole… Furthermore I don't like exposed mains wires inside…
This is my remix of Kavelry3D’s awesome Little Dumpy model. The dumpster shown in the images was printed at 140%. I recommend printing the lid (for the hinge pins) and the front of the dumpster (for the removable panels) with supports for…
I wanted better temps for my system so i modded a duct for fresh air intake and a mount for 2x 120mm fans in the bottom. For the 2x 120mm Fan shoud in the bottom you need to cut out some parts that are in the way and also need to remove…
Magnetic clipping Doomcube V2 top/bottom panel attachment that allows for panel installation after frame assembly. STLs already in print orientation. there is a 3.25mm bridge for the upper clips but should not require supports. Uses 32…
Cube Background Panels Repaired with Netfabb
A beautiful lantern with interchangeable panels and you can also stack the lanterns as often as you like. There is a lantern for electric tea lights and a lantern for the LED lamp kit 01, To stack the lantern there is an intermediate…
These panels are designed for use in 19" server racks (EIA310 and similar). There are a few different types of panel depending on what you would like to mount or use: Unfinished Panels - Unfinished panels are blanks that have no chamfers…
6mm panel mounting for voron 2.4 350
Just remixed to turn into 90° and added some "ribs" to keep the back a bit more straight
i created a simple minimalistic mount for the acoustic panels in my 3D-Printer case.
Notice! This is only compatible with Python for the AMS 2 Pro. Please view my other designs for designs supporting other AMS systems, there are plenty. Last update of serial numbers: June 29, 2026 Download the zip file here , right click…
Panels glue in place.
The joiner is simply twisted into place on both panels, or rotated into one panel (with the thicker side of the joiner) and clipped into place on the narrower side. Tip: it is easiest to clip panels on diagonally, one corner then the…
A very basic set of conduits and panels for modeling. 4mm cable bundle - 7mm connectors - 10mm to 100mm straight - 5mm, 10mm, 20mm and 30mm radius 90 degrees- 10mm, 20mm and 30mm radius 45 degrees - Y, X and T - 2 panels and a switch.…
My speaker still works great, but the rubberized coating on the outside panels has turned sticky. I designed a set of replacement panels that can be bolted in place of the existing ones. The speaker housing itself remains intact so it…
The Coralboard is compatible with the Waveshare DSI LCD displays, which have mounting holes for a Raspberry Pi. This doesn't have the same mount pattern as the Coralboard. I designed this using the STEP file for the 7" DSI display but the…
A cap for the top of a bifold door that holds the two panels open at 65°. Fold the door to about 65°, then press the holder down over the top edges at the hinge. Fit For panels 35 mm thick, hinged with about a 5 mm gap between them Slots…
Three sizes of hexagon MOLLE panels are available. Originally designed to fit inside a backpack, they can also be used for other purposes. Small: 9.6” x 11.9” Medium: 9.6” x 14.1” Large: 10.9” x 14.1” Print Settings: Rafts: No Supports:…
Mirror anti wind buffeting covers panels for Supra mkV. Printed with fuzzy texturing with low infill (10-15%) and using 3M double sided foam adhesive to install. Very easy to print. The file can be duplicated and flipped in the slicing…
Made them for 3mm Panels and much more Clearance (~0.3-0.5mm)
I added this in 1 of the 6 panel windows for granddaughter gifts, the others were 2 color snow flakes. Another panel with just the tree for your own text Thanks to invader for the awesome Christmas tree file !…
Diesen OSVAC-Adapter für meine Kappsäge Dewalt DWS773 habe ich mir gebaut. Er sollte auch an die DWS774 passen. Gedruckt mit PLA der Fa Geeetech. Den OSVAC Anschluß habe ich von einem anderen Adapter freigestellt, den Rohrbogen aus…
The model was designed to fit 120mm hexagonal pads. It ensures even spacing between the pads, and in my case, ensured that any push pins don't damage the wall. For a secure fit, I recommend using glue with the joints. The ones in the…
For this print, an MMU (Multi-Material Unit) solution is required. Additionally, you will need three 5x10mm round magnets for the print. Slicing Instructions: In your slicer, add the file “Main_Body_5x10mm_Round_Magnets.stl.” Add…
Upgrade your K1SE with side panels or repair your K1 / K1C / K1MAX I recommend using the plain panels if you plan to print high temp filament or want to keep the sound and fumes down, but have provided semi-open designs to combat heat…
DIY Coloring – 3D Printable Coloring Panels! 🎨 Print, Color, Create! Print in white (best for coloring) or any color you like. Finish with coloring the outlines black for a amazing effect! Scale it big or small 🛠 Scaling Tips for Best…
Since I started working on small scale solar power plants, I continued to search for ways to increase the energy yield of the two to four solar modules. The “Sunchronizer D1" Dual Axis Tracker is a solar module holder with which…
These are spacers that can be connected to either Multiboard Plates (previously Tiles or Panels) using Dual Clips. The default files are two Multiboard units long and go from 7 mm up to 24 mm in 1 mm increments. Usually it is enough to…
I took the universal design of the light panels from the death star and added them onto these RAM top bars
Notice! This is only compatible with Python for the AMS 2 Pro. Please view my other designs for designs supporting other AMS systems, there are plenty. Last update of serial numbers: June 29, 2026 Download the zip file here , right click…
A high-detail alien portrait relief designed for FDM printing, perfect for sci-fi enthusiasts and UFO believers. These thin, lightweight wall panels make striking décor for your home, office, or gaming space. Available as a single panel…
Some Top Panels to fully close the gaps in the Modular 10inch Server Rack when using the topper and Handles. The standard is always 3mm thickness. But if you are usind the Multiboard Add-On, then you will need the wider 6mm frontpanel and…
Works with 1515 extrusions and any panel dimensions. You just need 10mm bar or pipe of any material. I used AL bar, but wood or plastic should be fine too.
WIP - Ongoing design of control panels for my Elite Dangerous SimPit build. Currently all buttons and switches are connected via a USB arcade encoder and directly mapped in-game. This will likely convert to something Arduino based in the…
Skadis pegboard modular kit My daughter wanted a Skadis pegboard like this for Christmas. So I assembled it and hung it on the wall. It looks great with the accessories! Then I thought of doing something similar so that the individual…
Overview A clean and minimal LED strip holder designed specifically for HSW wall systems. This mount integrates seamlessly into the panel structure and keeps your LED strip perfectly aligned while maintaining a professional and…
Stylize your MPC XL with custom control panels. Can be printed with one color or multi-color. Includes: Right and left panels Right and left panels with layered .20mm button padding SP-Edition - Right and left panels with layered color…
A solid and honeycomb pattern side panels for the GeekPi RackMate TT (Affiliated link). Give your rack a new look, or some extra cooling :) This model is part of a series of 7-inch rack mounts I've designed. You can check out the others…
Its a replacement to posters which you can print out and stick it on the wall. It works best with white walls! There are separate files for each of the three manga panels and there i also an assembled one with all three in the same file!…
Panels you can glue onto your wavetek meter front panel around the binding posts to reinforce the plastic if it's already cracked. You can glue the original label decal back on after.
NOTE: These are specifically meant to be used with my other deck boxes. The dimensions for the side panels are "95.6mm x 69.6mm x 5.6mm". This is a small collection of side panels meant to be used with my other deck boxes. It includes a…
Got tired of seeing thick/bulky side panels plus seeing you needed extra screws and hardware to mount them. Designed this to be applied without any extra hardware or screws needed. All you need to do is remove the support bars on the…
Modified original panel to side panels, this suitable for drawers measuring 530x400 mm (lenght x width) "BaseToolgrid_ParteLateral" It is 73,8mm width. "BaseToolgrid_ParteSuperior" It is 87,8mm width
Thicker with larger magnets to hold the panel on better.
To print de basic structural you will need: 2 x 10-inch-rack-Foot 2 x 10-inch-rack-foot cross 4 x 10-inch-rack-Pilar 2 x 10-inch-rack-Pilar-middle 2 x 10-inch-rack-Top 2 x 10-inch-rack-Top-cross 1 x 10-inch-rack-Top cross -middle The side…
RST99 – 3D Printed SFF ITX PC Case A compact, fully 3D-printable Small Form Factor (SFF) PC case designed for high-performance hardware in a minimal footprint of just 9.9L. RST99 compatibility: Mini-ITX motherboard SFX PSU 240 or 120mm…
Designed and printed some custom panels and fan mounts for the A07 to help with thermals and aesthetics used ABS, petg would also work (pla would probably warp or melt) used some generic 80x10mm fans I found on Amazon…
A collection of 10" rack mount front panels ranging from 1U-4U sizes. The panels are split into multiple parts so that they can fit on a standard Prusa 3D printer bed. There are solid and hex hole patterned panels of each size. They…
Blaze AIO Sliding Panels an Fire Button. Customize your Blaze AIO with your own sliding panel an fire button. Six different sliding panels Panel 01 is press fit only. Panels 02 to 06 have slots for two magnets size 2x1mm. Depending on…
This model is an evolution towards the sculpture of my wall triptych project. The organic part consisting of the 3 panels is the result of Blender's powerful texturing capabilities via displacement on Blender. These 3 panels are designed…
I made these panels to add 12V power sockets into my truck bed. Includes a fuse panel and is connected to my chassis battery and an auxiliary battery in the truck bed. The switch panel has 12V sockets and a voltmeter, with 2-position…
With these four components you can make three different Escher polyknots and a polylink. The Escher dodecahedral polyknot component will come later. The triangle Archipanel and square Archipanel by jdanders are included for convenience…
I printed this without supports on the flat side with no issues.
There are some special versions included for electrical parts. One for a Schurter DD12 power entry module - a common power inlet with switch, and another version for a TE FN9260 inlet + PROMET S25 cam switch. But I'm sure you all have the…
Sidepanels to protect your legs/boots from excessive rain spray. I designed a simple "slide-on" panel. Only the bike plastic covers under the seat should be somewhat loose or removed to install. The version in the photo has an extra…
This is a grip panel compatible with the Novritsch SSG11! It lets you add MLOK compatible accessories to your airsoft rifle. Print with the screw holes facing up. Mirror for the opposite side. Print as a set. Ironing is optional if you…
Can be hooked into the top of an Egger acoustic panel, and will fit in one of the grooves. Pull it down slightly to notch it securely into place, some wedges will bite into the cardboard. Print in the orientation shown in the .3mf with…
Can be hooked over the top of egger acoustic panels, if installed with the aluminium extrusion as shown. The back will hook fit in one of the grooves. Pull it down slightly to notch it securely into place, some wedges will bite into the…
Jumper Wire Holder & Organizer Clip for Honeycomb Storage Wall (HSW) Precision-designed snap-in U-clip for clean, tool-free wire management on standard HSW panels. Snap-fit design with flexible retention lip Holds dupont/jumper wire…
Shelly Blu Wall Switch 4 Button Panels to make your own Buttons. STEP for easy remix included.
Cyma cm132 has removable grip panels, yet I haven't seen anyone make custom 3d printed version of them. So, there they are, I've made a blank pair of panels I encourage you to customize yourself, and attached a version I customized for…
Door hinge of the Voron 0.2 for the original Voron V0.0 kits with 2mm or 2.5mm panels. Fits exactly like the original hinges, follow the Voron 0.2 assembly instructions. Mods installed on my VORON:…
RPi 3 case with side panels as separate parts. For now there is only one version. I'll uploade more variants soon
PL: Czyste panele, dodajcie swoje wzory w SVG, rekomendowana grubość dodanych wzorów (wysokość Z) 1,6mm. Pasuje do deckboxa: https://cults3d.com/en/3d-model/game/cardframe-deck-box-60-basic-design-pokemon-mtg-riftbound Ps na fotkach mój…
My speaker still works great, but the rubberized coating on the outside panels has turned sticky. I designed a set of replacement panels that can be bolted in place of the existing ones. The speaker housing itself remains intact so it…
They can be used just as usual plywood connector or you can add screws for more strenght 2 different tightness that you can try.
The electroluminescent backlight commonly fails on Lotus Elise HVAC panels. These can be sent off for repair, but in the meantime you have all the cables hanging out of the dashboard. The dummy panel lets you glue a scanned image of your…
Replacement caps for the LostVape Centaurus G80 Pod Mod, inspired by the Ultrakill. The front cap with buttons and the top cap have been tested on a real device; the other models should also match the dimensions, but I ran out of money to…
Just made the A,B,C,D 3 panels 8 inches tall so the tubes wouldn't hit the top lid. Used these with the taller top panel
Panels, door, and top in two versions - solid and with holes for gluing acrylic hexagons (circumradius - 49.99 mm). If using the hexagon option, mine fit tightly, so if you cut them, cut with a radius of 49.9 mm. You can cut exactly in…
I found a LED matrix project on Youtube by Chuck Builds, and designed 4 types of enclosures to fit 1, 2 or 3 Waveshare LED Matrix panels. The main enclosure files consist of LED matrix enclosure Main body left LED matrix enclosure Main…
This was designed to need as low material as possible while giving a quick chance to fix the end of the material without the need of any helper that is not where you need it ;-)
The features of this model: parametric fusion360 model included lengh can be scaled to your needs short test print time in under 5 min each (just use the original lengh of 10mm) PLA works well can be printed laying flat since no big…
Just remixed to turn into 90° and added some "ribs" to keep the back a bit more straight
On the front side are cutouts for voltmeter + ammeter, two potentiometers and output female banana conectors. On the back side are four holes for the mounting of 50x50mm fan and a hole for a DC in 5,5x2,1 I have also provided you with a…
My fish tank came with a very small glass lid. I wanted to cover most of the tank while still having quick access to feed the fish so I cut down some scrap acrylic and modeled this hinge to clip the acrylic panel onto the existing glass…
Transform your auditory experience with our exclusive collection of AI-Created QRD Skyline Acoustic Panels, meticulously designed to blend high functionality with aesthetic appeal. This world-first, innovative suite of 60 unique STL files…
Modulair Diffusion panels with LED lighting! disclaimer: Still in the process of figuring out product design, testing and documenting everything this will be a very early concept. currently I'm in version 8 or 9 (can't even remeber/ keep…
Modular LED channels for hexagonal acoustic (or 3D printed) panels. The channels are designed to be printed with 0,4mm nozzle. Assembly material: Hexagonal Acoustic Panels 30cm x 26cm 3D printed Channels LED Strip: Minimum 60 LED/meter (…
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Last update of serial numbers: May 29, 2026 Download the zip file here , right…
Created these insert panels with hex pattern and micron logo because I didn't feel like buying acrylic panels for my top. I think these looks better than acrylic, lets see how they perform thermally though. I also lined the inside of…
Wall Mount Bracket flush mount for panels and coverings with marking tool - Sistema universale di Fissaggio rapido a scomparsa per pannelli e coperture Filaments: PETG - ASA - ABS - PLA+ Hardware needed: Screw 3.5x10/12mm for the…
xj650 side panels I have not printed the right side yet due to out of filament but should work. print the right side at your own risk :) and tell me how it goes. the left side was printed at 100 infill with supports everywhere. will fit…
How to use: Print parts Add tape to the parts Mark positions on wall Stick mount onto wall Slide panel onto the mount Print “ifolor wall mount large” if you want to use more tape. The smaller one works fine but might be sketchy depending…
Three sizes of hexagon MOLLE panels are available. Originally designed to fit inside a backpack, they can also be used for other purposes. Small: 9.6” x 11.9” Medium: 9.6” x 14.1” Large: 10.9” x 14.1” Print Settings: Rafts: No Supports:…
Allows a 4x3 Gridfinity tray to mount on metal perforated panel or on a Skadis panel, the two round holes are chosen in positions so they match both the perforation of 7.5mm holes and 9.5mm holes. M6 flat sockets screws work best
Upright holder for the Dremel Versatip, holds all included accessories . Meant for the metal perforated panels with 7.5mm openings. Use a flat socket M6 for mounting, and M3 can be optionally inserted for a better grip of some tips.…
I use these Nescafe jars to store a lot of stuff, especially automotive paints. these can be installed with M6 flat socket screws on perforated metal panels with both 7.5 and 9.5mm. Please like if you download
45 Deg tool holder for 7.5mm perforated panels, matches the underlying holes. holds any tool with a diamater of 5mm or less. Mounted with flat socket M6 screws please LIKE if you download
Holder from small literal files, works with 7.5mm perforated panels M6 flat socket screws Please LIKE if you download
