Laser cut panels for Creality K1 Series
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plain, Honeycomb, Slotted and D3D designs for laser cutting
- Ocena
- 3 / 5
- Polubienia
- 69
- Pobrania
- 444
- Wydruki
- 0
- Wyświetlenia
- 2028
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Standard Digital File License
Upgrade your K1SE with side panels or repair your K1 / K1C / K1MAX
I recommend using the plain panels if you plan to print high temp filament or want to keep the sound and fumes down, but have provided semi-open designs to combat heat creep for PLA while still keeping pets and small hands out.
These are too large to print. You must get them laser cut. I recommend 3mm thick clear polycarbonate. Corners have a 3mm fillet for machining.
Plain - Sealed version for enclosing the printer to print high temp filaments
Spider - Open for PLA printing. Matches the spider shroud.
Honeycomb - Open for PLA printing.
D3D - Semi-Open for PLA printing. Matches other D3D mods.
Slotted - Open for PLA printing.
Now you can match the theme of your other mods such as the cyclops, carto, spider shroud, bed fans, advanced nozzle wiper and more!
Please double-check the height measurements for the left and right panels. It appears that there are two different printer versions with a 7mm difference. the K1 max files provided are for 485mm panels
The K1SE has braces. You may need to use washers or remove them. Slight modification (sanding) may be needed