Liczymy pasujące modele…
Upgrade your garage wall button with this mechanical switch conversion. Instead of a cheap plastic doorbell-style button, this uses standard Cherry MX-compatible switches to trigger your garage door opener. Mechanism : This is a wired…
A cap for the top of a bifold door that holds the two panels open at 65°. Fold the door to about 65°, then press the holder down over the top edges at the hinge. Fit For panels 35 mm thick, hinged with about a 5 mm gap between them Slots…
Designed for M3 countersunk screws, and designed to flush-mount an Anderson SB50 plug.
Three sizes of hexagon MOLLE panels are available. Originally designed to fit inside a backpack, they can also be used for other purposes. Small: 9.6” x 11.9” Medium: 9.6” x 14.1” Large: 10.9” x 14.1” Print Settings: Rafts: No Supports:…
Standard encoder mount for rack panel with 24mm hole. (Neutrik etc.) Material: Whatever you want, but for outdoor use ASA, ABS or PETG. Support: NO
Mirror anti wind buffeting covers panels for Supra mkV. Printed with fuzzy texturing with low infill (10-15%) and using 3M double sided foam adhesive to install. Very easy to print. The file can be duplicated and flipped in the slicing…
a front-bottom one piece panelclip for my tophat extender. you need this only when you print the bottomcubes. https://www.printables.com/model/1027340-1530mm-tophat-extender
Enclosure for a Sonoff NSPanel Pro 120 . Couldnt find one online so i made one in fusion . Used some heat inserts for the plate mounting
Forma pro výrobu silničních panelů 1/14. Původně vyrobená z plastových desek, nově jen převedená do .stl. Doporučuju i tak díly 01 až 04 netisknout, ale vyrobit z desek podle výkresu - budou mít mnohem kvalitnější povrch a tím pádem i…
Forma pro výrobu silničních panelů 1/14. Původně vyrobená z plastových desek, nově jen převedená do .stl. Doporučuju i tak díly 01 až 04 netisknout, ale vyrobit z desek podle výkresu - budou mít mnohem kvalitnější povrch a tím pádem i…
Made them for 3mm Panels and much more Clearance (~0.3-0.5mm)
Need a keystone panel for your rc2014? This has you covered. Quick print, requires no support materials. Compatible with the Bump-Out-Box: https://www.printables.com/model/1068569-bump-out-boxes-for-the-rc2014 Source code on Github:…
A simple panel plank for the rc2014 Rear Panel Kit written in OpenSCAD. Compatible with the Bump-Out-Box: https://www.printables.com/model/1068569-bump-out-boxes-for-the-rc2014 Full source code on Github:…
This is a bottom panel for your Rook MK1 Printable in 4 pieces on the rook itself. The M3 screws to the skirts hold it in place, so you might want to get those as well. (they are not printable on the Rook MK1 yet, working on it) The M5…
Orient with the arrow toward the built plate and use tree supports 3/28/26 Added .Step File
I added this in 1 of the 6 panel windows for granddaughter gifts, the others were 2 color snow flakes. Another panel with just the tree for your own text Thanks to invader for the awesome Christmas tree file !…
Clip to add metal chickenwire on your solar panels. These clips prevent birds from building their nests between your roof and solar panels. This model is designed to clip around the edge of the solar panel. Panel edge size: 40x8mm
Saved an very old (from the 1980s) lab power supply and placed it in a new enclosure with 3D-printed front panel. 250 x 110 x 190 mm Enclosure I ordered from HERE
Description Panel lock for Tophat by @Luc1luc_279134 https://www.printables.com/model/567013-voron-24-trident-tophat-66mm/files https://www.printables.com/model/571759-voron-24-trident-tophat-35mm BOM: Printed Parts: 4x Lock 4x…
Diesen OSVAC-Adapter für meine Kappsäge Dewalt DWS773 habe ich mir gebaut. Er sollte auch an die DWS774 passen. Gedruckt mit PLA der Fa Geeetech. Den OSVAC Anschluß habe ich von einem anderen Adapter freigestellt, den Rohrbogen aus…
ATTENTION. THIS IS AN OLD AND BAD VERSION!!!!!! YOU CAN FIND THE NEW V2 HERE: https://www.printables.com/model/1727793-airbus-a320-radio-managment-panel-rmp !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Update 2025-08/05 -…
The model was designed to fit 120mm hexagonal pads. It ensures even spacing between the pads, and in my case, ensured that any push pins don't damage the wall. For a secure fit, I recommend using glue with the joints. The ones in the…
Arduino UNO 10" Rack Mount Bracket Panel 2U - Staffa installazione Arduino UNO rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025 Update: added resized models…
A non destructive mount for the acoustic panel aligned for a gap with 13mm width x 10mm depth
This is a front panel for a simple Intellijel-style 1U switched multiple for eurorack synthesizers. As it is relatively small, even basic PLA should be strong enough for this print. 10 HP
I built a little free pantry which has an acrylic window in the front. I could have bothered to use a router or something to embed the window into the frame, but I am lazy, so I just mounted it flat to the back, and didn't want to have to…
control panel - temperature, ventilation, and light. you will need: Digital Temperature Controller Thermostat Thermoregulator incubator Relay LED 10A Heating Cooling STC-1000 220V - 1 pc…
For this print, an MMU (Multi-Material Unit) solution is required. Additionally, you will need three 5x10mm round magnets for the print. Slicing Instructions: In your slicer, add the file “Main_Body_5x10mm_Round_Magnets.stl.” Add…
This probably works better as a diffusor, than a Dampening Panel. I thought that it might trap sound in the small chamber. Cant test it for myself because my printer is slow af :( but Ill be happy if someone uploads a make :) The…
Smart Crochet Panel – 100% 3D Printable & Modular This fully 3D printable crochet panel provides a versatile and expandable way to store and stretch materials—everything is 3D printed, no extra parts required! No screws, glue, or…
I needed some case to mount a solar panel outside and this is what I came up with. The project uses M3 screws and inserts, the leg needs eight 6mm m3 inserts, and the top plate four 3mm ones. There are 2 screw covers, one designed for hex…
Upgrade your K1SE with side panels or repair your K1 / K1C / K1MAX I recommend using the plain panels if you plan to print high temp filament or want to keep the sound and fumes down, but have provided semi-open designs to combat heat…
This is a pegboard designed to be used with artist alley displays at conventions and markets! Included in the files are 3 versions of the pegboard: A large 280x280 version which fits on my Artillery Sidewinder x2 and nearly covers the…
other modifications……. https://note.com/newspeak/n/na6e293d8471e
This is a engine cover panel for the Yamaha bolt or the Yamaha SCR, it is a direct replacement for the stock panel that typically gets scraped up if a bike gets put down. It does have a flat top that you can print build plate down to get…
Update 2025-08/05 - Added my Mobiflight preset and a section in the end explaining it + some pictures. Note : I have included the f3d file I used to add the text but since it got corrupted at the end and I had to recover an older version…
📄 Meshtastic Winter Solar Mount – 67° Tilt Bracket Currently, my Meshtastic RAK is running smoothly with a 5V 10W solar panel and 3×18650 Li-ion batteries — even during bad weather conditions. The setup uses the 67° solar panel bracket…
2026/01/26 update: Added dual stack mount to mount 2 module at once. Remember to cross the wires as the are mounted opposite with each others. ===== 2025/10/15 Update: A user asked for source Fusion360 file so I've added it. ===== I…
I designed this Extended Clip for Ring Solar panels after noticing that my solar panels weren't getting the most sunlight throughout the day. I decided to design an extended version of the clip that already came with the mounting for the…
Wanted to add a fan to the front of an Okinos Aqua 3 that I use for testing some PC components to increase airflow at the expense of long GPUs. I printed the first 2 layers in transparent and swapped to white in order to display my RGB,…
Why this mod? Ender 3 S1 is still a decent printer, but transferring models via SD card is pain OctoPrint - and RaspberryPi-based OctoPi distro in particular - is a popular way to solve this existing mods either utilise the drawer space…
I wanted to utilize the Core One left recess to store a print sheets and a box with 3d print accessories. I found the “Ikea”-alike the original scandis mod solution useful as it can be easily extended and modified. I created side mounts…
DIY Coloring – 3D Printable Coloring Panels! 🎨 Print, Color, Create! Print in white (best for coloring) or any color you like. Finish with coloring the outlines black for a amazing effect! Scale it big or small 🛠 Scaling Tips for Best…
Panell per al muntatge d'una estació de qualitat de l'aire. Panel para el montaje de una estación de calidad del aire. El conjunt el formen el panell, el frontal per ubicar tira de leds i pantalla, potes (encaixades), alça per al sensor…
DIY Coloring – 3D Printable Coloring Panels! 🎨 Print, Color, Create! Print in white (best for coloring) or any color you like. Finish with coloring the outlines black for a amazing effect! Scale it big or small 🛠 Scaling Tips for Best…
This design is intended for a square tissue box holder that fits discreetly behind the interior panel of a Tesla Model Y and potentially the Model 3, given their similar interior layouts. The holder consists of two parts: a box and a…
These are some hinges for the top panel of the original SV08 enclosure (could probably be used with other printers). The panel should be removed when printing materials that need good cooling (like PLA). These hinges take advantage of the…
Replacementclip for holding the loops for Rittal 7159035 panels.
I printed mine in a fuzzy texture to hide the layer lines but it can be printed just fine without texturing too. If using the STI panel with the inlay text, it could be filled with paint, or there is a cutout version for using a colored…
Ignite your space with the complete evolution of Charmander – Charmeleon – Charizard , now in a vivid retro LED panel! Designed with comic-book-style halftones and bold colors, this light panel brings fiery energy and nostalgia to your…
Since I started working on small scale solar power plants, I continued to search for ways to increase the energy yield of the two to four solar modules. The “Sunchronizer D1" Dual Axis Tracker is a solar module holder with which…
NB! The O11 Dynamic EVO is not supported as it is totally different from O11D EVO RGB. The print bed size for EVO RGB is minimum 326mm. Internal 14-inch diagonal LCD custom made for LianLi Dynamic O11 Dynamic EVO RGB/Mini PC case. For the…
This is a panel for a 10 inch rack with cutouts for 4x 9 pin dsub (db9) connectors and a Powerpole connector. Tested with 0.8mm nozzle only Parametric allowing tweaking of most of the dimensions to suit alternative components
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
These are spacers that can be connected to either Multiboard Plates (previously Tiles or Panels) using Dual Clips. The default files are two Multiboard units long and go from 7 mm up to 24 mm in 1 mm increments. Usually it is enough to…
Description This project provides a complete mechanism to mount and rotate a LED panel using stepper motors (NEMA 11). The design allows the panel to pivot 90 degrees to toggle lighting on or off for samples underneath. All parts are…
So I made the original just as a replacement. This integrates 52mm gauges similar to the Monaro's optional gauge pod, and the wonderful aftermarket ones that are admittedly a little pricey. Print with something UV and heat resistant. Also…
In order to customize my BattleStack with the symbol of my team. May this be helpful for some other Kroot players.
Spacers for a wire fence / mesh panel in order to mount the mesh panel to a wall or fence. Available in two lengths: 20mm 40mm Use the appropiate hardware for your backwall (wood = woodscrews / concrete, bricks: plug + screw) Probably the…
This is a snap in cover for a 5.25" bay. I can't guarantee it's work with your machine as they're all ever so slightly different but it's worth a go! The idea is it covers un-used expansion bays. It should snap fairly snugly in to place.…
This is a snap in cover for a 3.5" bay. I can't guarantee it's work with your machine as they're all ever so slightly different but it's worth a go! The idea is it covers un-used expansion bays. It should snap fairly snugly in to place.…
Peg to hold blanking panels on Microlab 6 inch rack. Screws or bolts are not needed to just hold the blanking panels, hence this model. Three sizes are published to suite different tolerances. Printing: I would recommend no brim if your…
I took the universal design of the light panels from the death star and added them onto these RAM top bars
Notice! This is only compatible with Python for the AMS 2 Pro. Please view my other designs for designs supporting other AMS systems, there are plenty. Last update of serial numbers: June 29, 2026 Download the zip file here , right click…
Collection of 10 inch blank Panel with Voronoi Pattern 1-3U These Models have a finer pattern than my first model with the Voronoi pattern Print as you like, these models are not for structural integrity.
Print-Friendly Design: ✅ Standard FDM printers – no MMU required 🧩 Panel is split into two parts to fit printers like Prusa MK3/MK4 or Bambu Lab 🪛 Parts are designed for easy alignment and assembly using printed alignment pins ✅ MMU -…
My father asked me to make a roof for the electrical panel. Why just do it if you can be creative? I found a model of tiles here and designed a roof for it. I also added the ability to install an LED candle. It turned out well. Printing…
This is the MiSTer Multisystem2 LCD Screen (flip up cover) enclosure. We will post more internal adaptors and cover panels for different size LCD modules when available. If you design a different LCD cover/mount/enclosure, please share…
A high-detail alien portrait relief designed for FDM printing, perfect for sci-fi enthusiasts and UFO believers. These thin, lightweight wall panels make striking décor for your home, office, or gaming space. Available as a single panel…
Some Top Panels to fully close the gaps in the Modular 10inch Server Rack when using the topper and Handles. The standard is always 3mm thickness. But if you are usind the Multiboard Add-On, then you will need the wider 6mm frontpanel and…
Disclaimer: This is a part of a blog post I am currently writing up. I have not tested this yet but once I have, I will update this model to reflect this. I have created this three switch panel that enables 12V accessories to be attached…
12 keystone patch panel for 10" rack + test piece to test fit. Blank keystone module. Cable pass keystone moduly in 3 / 6 / 9 mm. SMA bulkhead keystone module. Toggle switch keystone module. I recommend printing the test piece first to…
Remix of Keystone Panel Mount by M Hole diameter is 3.4mm and the screwhead (widest part of the scew) 6.25mm.
An extended version of @dombeard's model for mounting car charger devices to molle. I remixed it and used it for a patrol car duty bag so my battery and flashlight chargers don't go flying around the car. Prototype was made in Elegoo PLA…
While Thermal take dosent recommend it, you can install the MSI Project Zero motherboard and its an amazing combo. However there are definitely some issues, one of them being the power cable interference with the SSD/HDD tray in the back.…
The wood strips are 275x10 mm with a max thickness of 13.5mm. They are made to be slid in from the back and glued. Printed at 0.08MM layer height to mitigate drooping on the overhang (made to match the stock panel) (I laser cut the strips…
This is a fusion 360 file, you can edit the sketch to adjust the serial number
***********30/6/2026: revisiting this again, will add mounting locations the same as the FT panels, so that you can simply use a longer screw. Will upload the original panel as a whole so that you can just use your slicer to split it into…
Fancy square key for ceiling access panels and any square key. You can remove the blue (8mm) sleeve to get a 5mm key. The key is honestly a bit weak. It only works for low torque operations Print the main body 5 walls thick, PETG, NO…
I have a NAS server with the Antec P101 Silent Case. When the side panel clip broke I made this one to raplace it and figured, why not share with others that may be searching for this too.
The Prusa Core One has a side cavity perfect for customization and accessory storage. The openGrid ecosystem is a great option for this purpose through the combination of native parts and compatibility with MultiConnect, HSW, MultiBoard,…
Need a BIG cup holder for your Thermo/Hydroflask or similar bottle? The factory cup holders just aren't cutting it? Well, here you go. Attaches to the MOLLE panel on the passenger side of the center console. Tested on my 4th generation…
I wanted the Link Box on the front of my 19" Rack Case. Should fit any 5.25" Slot. Not sure about the mounting hole location. Your mileage may vary there. It's designed for M3 screws and Heatset inserts. The Big 30mm hole is for an USB…
designed because I don't like to print large flat panels when I have access to a laser and router
A simple box that holds a small CCTV solar panel. Has an SMA connector for an antenna and is designed to be mounted on top of a 15x15mm square tube, pipe, or wooden stake driven into the ground. Fusion360 source included, it's a mess but…
AMC Eagle Gauge Panel – Aftermarket Conversion This is a custom gauge panel designed for the optional gauge cluster in the AMC Eagle. My Eagle came with the factory gauge console, but not the proprietary cable needed to connect all the…
thicker side panel spacer, also change the length of the hinges for the side panel. And the reel mounting assembly and reel roller. the hinge parts for the side panel are the same as original. The reel mounting support is printed to…
Support for a small 110x60mm solar panel. On the 3mf, the print speed is set to 0.08mm and the medium speed for fast printers. I've gotten good results printing at 350mm and 0.16mm layer thickness (if you want to save time) or with…
Works with 1515 extrusions and any panel dimensions. You just need 10mm bar or pipe of any material. I used AL bar, but wood or plastic should be fine too.
These are longer panels for BeamCase Sandwich V3.0 with 15x15 Aluminium profiles that are between 300mm and 360mm long. The panels come with and without integrated handle, as well as version that are split along the length or one piece…
🧱 Description This support is designed for the Inverted Electronics mod on the Voron Trident . It provides a solid yet cushioned base for the electronics cover panel, effectively solving the issue of the original clips that tend to come…
dont forget to scale model, printed mine in ABS best used with reverse psu mount which is also available I do not consent to the sale of this model or any of its remixes in digital or physical form.
This bracket allows you to mount an HDD where you'd normally install a DVD drive in a computer. It was designed to use as little filament as possible thus making it cheap and quick to print whilst still being sturdy. You'll need 8 screws;…
Commercial Use and Attribution Notice: ACOS Design © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale,…
This is a flexible panel that sits at the bottom of the instrument cluster right above the steering wheel. My original one was deteriorating a bit and I reverse engineered it and came up with this. Some of the small holes may be off…
Quick remix of the side panel with multiboard to also have vents. Needs to be printed with supports on the bottom of the multiboard for clean print.
![Airbus A320 FCU Panel [Multi-Colored Version]](https://media.printables.com/media/prints/593f00c0-3341-493d-8912-13753b25a9c7/images/10386328_3156a600-e933-49bc-86ba-a0dd67c6a0ba_1f09afc6-4763-4888-8223-adef2815539a/pxl_20250716_122757329.jpg)
