Liczymy pasujące modele…
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Inside Out - Anger , Pixar movie !!BUY Anger GET 2 OTHERS FREE!!
Originally designed for the Makita LS1110F mitre saw and the Parkside PWD vacuum cleaner. Compatibility with other models is possible. Highly durable, simple design. Printing from PETG - perimeters only. Navrženo pro pokosovu pilu Makita…
Let me introduce you to my modular parkside pbspa 12 cordless screwdriver workstation. Any part can be printed separately and then joined together. There is no need any support with printing.
Easy to Print 110.63mm x 200mm, 2mm thick. Prints in around 1hr 30mins on my P1S For multi extruder printer, split into parts then select the parts for the second colour (first part in normally the base colour layer, all other parts are…
15 cm Long Crevice Tool - 1.5 cm Diameter (Nozzle) Designed for precision cleaning in tight spaces. Ideal for reaching narrow gaps and hard-to-access areas, it is perfect for tasks like car detailing. The outer diameter of the adapter is…
A funnel for an Odin Sidewinder speedloader for making the refilling of the speedloader less of a hassle and less risk of spilling BB's everywhere. This has been designed to sit in the opening of the refill hole with a friction fit and…
Prints in two parts to avoid impossible to remove supports. Looks quite good. Did not glue them together to make it easier to fit/remove the cable. I know the photo is not as neat as some would want it, but it hides the long cable in my…
Krytac P90 Side picatinny rail. in thre different versions: Cilinder head, Sunken head and button head screws. Walls: I suggest at least 4 Infill: anything over 20%
Hey guys, i design my own PS4 500gb under desk Holder! I post here left side!
Hey guys, i design my own PS4 500gb under desk Holder! I post here left side!
Print per original model instructions. I recommend 3 walls with a 0.4mm nozzle for the frame.
3D Printed minimalist bedside lamp with Ikea with smart bulb
This is just a small box that hangs from the aluminium extrusion profile beam of the Prusa Mini, 70mm*70mm*32mm, to store some small stuff (like filament clips in the photo). It was inspired by chris4834's Side-mounted under-bed Storage…
I wanted to use Noctua's 5V PWM fans with my LDO Leviathan board, and in order to save space on the DIN rails, I wanted to use the Wago mount designed by Dr-Info. However, the mount only holds 2x Wago 221-413 terminals whereas I needed a…
I use a side spool holder and I didn't like the filament guides I found online, so I made my own. The two brackets, one for the side, and one to go above the run-out sensor, take one of two modular pieces that can either hold this Amazon…
This is a Spice packet (/sachet) organizer with a convenient side opening. This opening allows easier access, especially when storing the packets up high or in tight cabinets. The individual compartments are sized 12cm deep, 3cm wide and…
This model is compatible with the lego system.
Badminton Stringing Machine Side Support need M8 bolt without head
Attachment mounts for lightweight cameras with standard tripod screw (1/4-20) Usable for baby cameras, web, streaming cameras or any other lightweight cameras. Shelf side mounts are designed for Ikea Kallax shelf top section and baby…
A charging station for a Samsung A34 (another cable from amazon), a Garmin Vivoactive 5 (Orginal cable) and the Galaxy Buds 2 (Orginal cable). Since I don't have a bedside lamp, I added an LED strip to the model. Since this configuration…
I had a sideclick that was used with a roku but changed over to Chromecast with Google TV and I didnt want to buy the google remote version of the sideclick so i made one. Its a two part build with the blank side that can be used if you…
To print and use: Follow @suit's original printing and assembly instructions . (Print flat on bed, in PETG). Mount the front MC4-M6 connector and PTFE guide. Print and assemble a y-splitter of your choice. The one pictured is the splitter…
Parkside battery holder easy to print , follow my orientation to avoid supports , the model must be upright 50% infill , 0.2 quality , pla , petg and abs filaments are good Njoy Below is the link with all my designs…
It's a backscratcher with two settings - one side for gentle scratching, and one side for manly men who want to remove some skin. Comes in 3 different lengths for any size printer, but feel free to use the STEP to make your own. Can be…
My main recommendation is to use a seam painter for the outside of the jig, otherwise it left a raised area inside each arc.
As my printer is located on desk with original enclosure I designed side spool holder. Central cylinder is for spools with 55mm central hole. I used aluminium stick 8mm for cylinder, but also there is file for spool sticks, please use…
This is a model of the shift linkage bushing on the transmission side of a B Series Acura Integra. This should be very accurate but the only part I wasn't 100% sure on was the taper for the dished side of the bushing as I didn't have the…
My Husky Toolbox drawer either came off when I moved, or they were never on there to begin with. This was my first ever 3D Print and Modeling. I literally have zero experience and I am pretty happy with how they came out. When installing,…
Originally designed for the Makita LS1110F mitre saw and the Parkside PWD vacuum cleaner. Compatibility with other models is possible. Highly durable, simple design. Printing from PETG - perimeters only. Navrženo pro pokosovu pilu Makita…
The wheels are made off TPU so it doesnt make scretch or make noise. “wo walls” is flatt outside.
Parkside welder spool bushing for PIFDS 120 B2
Designed from scratch, but very aesthetically compatible with the existing Voron Zero skirts. Fits in the 100mm gap that you add if you swap all the y extrusions from 200mm to 300mm. Why did you do that? Who cares!
Hi! I want to introduce you my drill press for Dremel/Parkside multitools. It's easy to print and assemble - you only need a few screws and nuts to put it together. IMPORTANT NOTE: Print “Lock_nut_Parkside.stl” and/or…
I have two problems with the stock mercury one.1 tower: They stick out from the back and under heat and stress they bend, this make the belt rub on the idler, causing excessive wear and tear. The latter could be explained by my poor…
Minimalistic holder for the Parkside Multimeter to Ikea Skadis pegboard
Summary for einhell 18v nickel cadmium , yellow and grey models base for Einhell Power x batteries or base for parkside x20 batteries Print Settings Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: .2 Infill: 30…
Summary Upgrade x20 team Parkside 2.0Ah to 6.0Ah use 10 sony 18650 vtc6 need 4x 30mm m3 bolts for replacing the original locking screws Print Settings Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.20 Infill:…
New V3 with grooves for grip, angle markings, and modified dovetail channels! Slightly tighter clearances as well for less play. New V2 dovetail design added! Slightly flexible filament like PETG recommended to join the pieces without…
This ID Holder is double-sided and will fit standard IDs or card sizes. The model is recommended to be printed in PLA, PETG or ABS and does not require supports. I hope you enjoy the design and please comment if you have any issues or…
I uploaded this model so other people don't have to waste an hour printing just to find out that it doesn't fit at all. I tested it as shown in pics. Works 100% with WMVos 's side mount:…
If you have a workshop, and workshop cabinets, a workshop table and a workshop trolley... you know very well that every mm of space counts. This model will save space, for the soldering station from Parkside, when you will never have to…
Was looking for a useful way to mount a working light on the P1S. Planning to print the side spool holder , I saw a nice opportunity to add it there. Maybe it's also helpful for anyone else. Had a clamp gooseneck lamp ( Amazon.de ) in use…
Side hook for IKEA BROGRUND towel holder. You will need one M3 square nut and one M3x12 screw . Printed in Petg with a solid part where the screw is inserted (as shown in the .3mf file).
I printed the original model for my Atillery Sidewinder X4 Pro. After a while the screw came loose and sensor rotated downwards which made the filament move less smooth than before. So I made this remix based on @waintdeir's model,…
I love Far Side and love my daily Far Side Daily Calendar but I just can't bring myself to throw away the old ones. Enter the daily Far Side Calendar empty inbox. (this will most likely work with almost any daily calendar or similarly…
This model is compatible with the lego system.
This model is compatible with the lego system.
This adaptor converts older Einhell battery tools for use with current Parkside 20V battery. There is no difference in battery shape, as older Einhell tools use the same battery as current Parkside 20V battery. Only difference is position…
side tray for the righ-hand side of the Ender 3 V3 SE. Clips on at the back loosly so easy to remove.
Simple, does the trick. Needed a spot to put my kindle next to my bad. Designed this, used double-sided 3M tape to stick to the side of my bedside table. PLA is fine, 15% infill, 4 perimeters. Used fuzzy skin, looks good.
I've used this model since the first few days of having my K1 Max. I had to rearrange my print space in a way that continuing to hang spools off the back of my printer was no longer feasible. However, moving to the side mounts readily…
Just a very simple, fun, quick project that will appeal to people that use the large 830ml bottles of French's mustard (from Costco). Getting that last little bit of mustard out by keeping the container upside is no problem with this. Of…
This is a two-part holder to mount the Trendsetter jewellery practice wheels onto the Jura inside ring vise. It comes in two parts, both printable without supports. It slides in between the various gaps in a Trendsetter practice wheel to…
Snap-on filter holder for Parkside soldering fan (PARKSIDE Löthilfe mit Halteklammern ). Work in progress.
Simple xbox controller stand/support that is modified to be screwed into the desk's side. I printed it on a ender 3 v3 with 0.20mm layer height and other default settings, nothing special. Note that this is a remixed version of Fx137's…
Figure size: 19,8 x 18,31 x 40 mm Use your own stand or a pre-made stand in .stl Supports are necessary Illustrative pictures & gifs Possible re-make for your own, non-commercial purposes My private AI model without textures is available…
Soldering iron mount for the Minimalistic Heat insert press that can hold a parkside PLS 48 D2 soldering iron or others with 26 mm diameter.
This is a logo to print in White and glue on the camera cover for Darts Camera and LED Ring mount by 3DEngelen.
Remixed Leaf 1 coaster to be double-sided. Printing without supports.
These are replacement trays for the widely used small parts organizers offered frequently from Aldi (Workzone), Lidl (Parkside) and Allit (Basic 33, VarioPlus Hobby). I maxed out dimensions of the the trays and kept it as simple as…
This is an M28X2 nut for a Relaxdays bedside lamp.
This part is a holder for placing the “Krontaler” thermo-hygrometer inside an enclosure or a filament storage box. By the way, this ALDI-hygrometer can measure humidity from 20%, unlike some other models which start measuring only from…
Wallmount battery holder for the 12V PARKSIDE Performance ( Bauforum24 Edition) cordless screwdriver AND the battery. Is it also available for screwdriver ONLY . Made especially for users who won't let their cordless screwdriver rest with…
Parts List : PTFE tube (stretch the PTFE before hand) 1 M3 screw for ptfe approx 20mm (stretch the PTFE before hand) 2x m3 screw approx 10mm for attaching to the printer 3x m3 nut Tape IMPORTANT: The STL file is slightly modified for…
Printable rack rails and matching 6mm nuts and bolts to mount your (lightweight) equipment in 10" DIY racks There are lots of options for printable rails out there, but I wanted something where I could mount side panels and have…
I was annoyed with the bowden tube's awkward bend, being attached in the back of my K1 max, while I had changed to a side-mounted filament spool holder. So I made this over-engineered bowden tube side-mount. It's best to print it slow, as…
Printed here in PET-G .2 layer, 15% infill no supports. Funnel also fits many popular desiccant boxes for the Bambu AMS
This side clamp jig is a fastening device used to hold objects securely in place by applying lateral pressure using a regular clamp as the holding force. It consists of a clamping mechanism that applies pressure to the side of a workpiece…
E N G L I S H My Artillery X3 Plus had a crooked print head, which caused the prints to tear off at high speeds. You can't use a standard measuring angle, so I designed a small angle. While I was at it, I thought it would be a nice idea…
ENGLISH: The end piece of the hose for the Parkside PWS 20 B2 wet vacuum cleaner. Turn the hose from the broken piece. It is glued, just cut it off in case of need. From the original we need the mounting ring and the rubber seal. Do not…
Hola! He adaptat la meva moladora Parkside PFBS 12 C/ que té una rosca M20x1.5 als accessoris xinessos per màquines Dremel ®que indiquen rosques 19x2 ò ¾. Imprès a Q:0.2 ; fill 50 ; PLA
other modifications……. https://note.com/newspeak/n/na6e293d8471e
1GB Plymouth Laser/ Eagle Talon/ Mitsubishi eclipse Side marker light clip MB596509. I recommend printing on resin printer. Might need some sanding. It is exact copy of original.
In an effort to improve the signal quality to my Soliom BF08, I designed this bracket to relocate the antenna to the side of the feeder. The result is a huge increase in signal, since there’s no longer a sizable metal box interfering…
I made the side PTFE mount longer, so the PTFE tube is directly above the spool.
Hi. I've designed an attachment for Parkside dremel that holds the original wrench on the bottom of a tool. Dremel can still stand vertically with this attachment. It also fits the original case. I mounted it using superglue. The design…
it is very easy to print and does not require any support i printed in PETG for store in car! the dimensions of the box are 200x54.9452x55mm
I have missed something small to hold my Parkside wrenches so made a mini holder. There are 2 sets as those wrenches are a bit different. Printed (0.2 mm layer, 2 perimeters, 18% infill) in PLA and glued to hold together.
When you're tired of dry box mounted at back. Usable for both sides, but on right side fan could complicate drilling and mounting. Maybe you needn't take off side fan, I moved bolts higher then on photos. But drill holes for them…
These boxes have rounded insides and finger recess, and we use them for cutlery in our kitchen drawers. They are for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). I use these to store cutlery and other…
This mounting system for the Coolermaster Qube 500 enables secure attachment to the side panel of a desk. Once the brackets are fixed to the desk structure, the case can be frontally extracted without the need for tools, allowing for easy…
Allows to use Guppy screen with a side mounted display. Prints good with tree supports. Changelog: V2 - made it more compact and pretty. Also changed the angle a little and it's now compatible with the Storage Boxes . Also easier to…
Mounting bracket 3 sides-40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 50min ca.: 4,4m Filament no Supports 50% Infill
Windshield side winglets can give a bit an optimised stream of air since the BT1100 windshield is somehow narrow at the top. These are specifically done for 4.5 mm-thick windshield that is curved in two directions. There are three size to…
This Skirt takes 30mm fans in order to keep your Vorons electronics compartment cool. The parts fit like the original ones. The 30mm fan does not need to be the same as in the hotend. a cheap one will do. Looking for a 30mm fangrid?
This is side rails for the Yaesu FT891 HF radio, they should be used with 4 pieces of M4x10 screws with washers(smaller than 10mm diameter). The frame will protect the buttons on the front during field operations or transport. I recomend…
Update April-26: Thanks to @WK_0bjkt_4142451 for highlighting that some of the newer boxes have additional tabs that prevent these holders from working. Please see his comments for details. v2 update : Improvements to have a tighter fit…
I wanted to utilize the Core One left recess to store a print sheets and a box with 3d print accessories. I found the “Ikea”-alike the original scandis mod solution useful as it can be easily extended and modified. I created side mounts…
I had always planned to use my Core One with legs and place a tabletop on it, turning it into a functional table. Because of this setup, top intake was no longer an option, so a side intake system became essential. This design can be…
![Camera mounts for the shelf edge and for any surface with double-sided tape [ OpenSCAD ]](https://media.printables.com/media/prints/1067473/images/8076221_2d7aa47a-3357-4a89-a00a-223f51c39ef7_22064794-d5cc-4db6-b416-550fcb835d9d/img_20240925_200540.jpg)
![[ALCH] cutlery boxes with rounded insides (ModuBox)](https://media.printables.com/media/prints/8a666ac4-2334-4997-814b-8ad02c4b2f9c/images/9412881_28d81996-52a0-499a-af56-c34cce02ea14_e591874a-9a86-4732-87f6-48f9b6e52da4/img_3644.jpeg)
