Snap-Close Jewelry Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small decorative jewelry box with a snap-fit lid
- Ocena
- 4,786 / 5
- Polubienia
- 205
- Pobrania
- 1171
- Wydruki
- 13
- Wyświetlenia
- 4198
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
This is a small jewelry box which has the lid securely snap into place.
It's quite small by default; I made a bunch at 1.5x scale.
The original I derived it from has too round of a fillet at the bottom, so you may want to lower the model into the build plate by a bit in order to prevent an ugly overhang there.
Material: PLA, or anything really.
Layer heights: 0.2mm works, but I did adaptive layer heights for the lid.
Walls/infill type/infill%: whatever you want.
You'll need to really dial in your support Z distance for each material for the lid. I printed a bunch in different brands and colors of PLA/PLA+ and some stuck way too firmly and some didn't stick well enough.