Snap-Close Jewelry Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small decorative jewelry box with a snap-fit lid
- Rating
- 4.786 / 5
- Likes
- 205
- Downloads
- 1,171
- Makes
- 13
- Views
- 4,198
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
This is a small jewelry box which has the lid securely snap into place.
It's quite small by default; I made a bunch at 1.5x scale.
The original I derived it from has too round of a fillet at the bottom, so you may want to lower the model into the build plate by a bit in order to prevent an ugly overhang there.
Material: PLA, or anything really.
Layer heights: 0.2mm works, but I did adaptive layer heights for the lid.
Walls/infill type/infill%: whatever you want.
You'll need to really dial in your support Z distance for each material for the lid. I printed a bunch in different brands and colors of PLA/PLA+ and some stuck way too firmly and some didn't stick well enough.