Prusa CORE One/+ MMU3 Y-Splitter FESTO (compatible with Enclosed version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa CORE One MMU3 Y-Splitter FESTO, avoids swapping tubes between MMU3 and regular use.
- Ocena
- 4,864 / 5
- Polubienia
- 328
- Pobrania
- 1000
- Wydruki
- 24
- Wyświetlenia
- 5245
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version.
Since the length of the original PTFE-Tube is 390mm the length of the two PTFE-Tubes is as follow:
1x PTFE Tube 4x2.5x40mm (between MMU3 and Y-Splitter)
1x PTFE Tube 4x2.5x296.3mm (between Y-Splitter and Extruder)
Additional parts required:
3x FESTO QSM-M5-4 (153304)
Print Settings:
print in upright position as shown in the shared picture
Material: Prusament PETG
Print Settings: 0.1mm FAST DETAIL
Infill
Fill densitiy: 100%
Fill pattern: Rectilinear
Skirt and brim
Brim width: 8mm
Support Material
Generate support material: Enable
Enforce support for the first: 25 layers
Style: Organic