1 / 6
Prusa CORE One/+ MMU3 Y-Splitter FESTO (compatible with Enclosed version) — image 1
1 / 6

Prusa CORE One/+ MMU3 Y-Splitter FESTO (compatible with Enclosed version)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Prusa CORE One MMU3 Y-Splitter FESTO, avoids swapping tubes between MMU3 and regular use.

Rating
4.864 / 5
Likes
324
Downloads
1,012
Makes
24
Views
5,291
Reviews
22

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version.

Since the length of the original PTFE-Tube is 390mm the length of the two PTFE-Tubes is as follow:

  • 1x PTFE Tube 4x2.5x40mm (between MMU3 and Y-Splitter)

  • 1x PTFE Tube 4x2.5x296.3mm (between Y-Splitter and Extruder)

Additional parts required:

  • 3x FESTO QSM-M5-4 (153304)

Print Settings:

  • print in upright position as shown in the shared picture

  • Material: Prusament PETG

  • Print Settings: 0.1mm FAST DETAIL

  • Infill

    • Fill densitiy: 100%

    • Fill pattern: Rectilinear

  • Skirt and brim

    • Brim width: 8mm

  • Support Material

    • Generate support material: Enable

    • Enforce support for the first: 25 layers

    • Style: Organic

Tags