Miyoo Flip Case (UPDATED)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy TPU Case
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A Simple TPU Miyoo Flip Case!
A simple Miyoo Flip case, print in TPU with supports for the bottom piece and enjoy! NOTE: This case is mostly for looks and feel because it can not cover most of the corners because of the triggers and the hinge.
How to print with the retrofist version with a single color printer:
Make sure that the fist is perfectly aligned with the fist indent on the bottom of the case in you slicer then print the fist first, change the filament, then without removing the retro fist form the build plate print brint the bottom piece. Also make sure that the build plate does not cool off too much while switching filaments because it will not work if the retro fist design is not stuck to the build plate properly.
Version 2.0 Update Changes
The new version of the miyoo flip case now has has rounded edges, a tighter fit, more responsive buttons, better ventilation, better trigger access, does not have the lip overhanging the top of the screen and I also removed the second SD card slot. I might also add some cool logos for the case to make it look better.
Version 2.5 Update Changes
This version has a few sumper small changes, I made the backside of the bottom piece the same thickness as the other walls, made the cutouts for the ports align a bit better, and fixed the issue with the top and bottom pieces sticking out a little too far and interfering with each other when you close the device. I also added the retro fist bottom.