Anbernic RG35XX H Protective Case with Better Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The slim Anbernic RG35XX H Protective Cover with Improved Grip
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The initial case design provides good protection and functionality but is large and has a sharp edge at the bottom near grip areas. As a result, I put my fingers in less comfortable positions to not feel discomfort from the sharp edge. Also there was slight misalignment of a hole for LED indicator.
Thus I made the new slimmer case with a lower protection but dramatically improved grip. Now I can securely hold the device with one hand on grip. Also, added a pocket in front of the device screen to omit potential scratches. And finally, now the hole is located directly opposite the LED so you can effortlessly see the device charge status.
I printed with 0.4 nozzle, 0.16 layer height. I think 0.2 layer height also should be fine.