Magnetic RG35XX H Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sleek an compact case for the Anbernic RG35XX, Simple and easy to print with no supports. Magnetic Lid.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 372
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic RG35XX H Case
Recently discovered these anbernic devices and they are a game changer! Endless hours of fun in such a small device needs to be celebrated!
Created this case so i can chuck the console in my bag without worrying about scratches or it getting crushed.
**************************************************************************************************
Printing Instructions
- .20mm Layer height
- No Support, no brim(you might need it if you have problems with bed adhesion)
- Print flat side down
- For Multicolor prints, import top(with logo) as a object with multiple parts, apply color to the text and print as one piece.
- I used PLA, but you might want to try PETG if you really plan on tossing this thing around, or if you ever plan on leaving it in a hot car.
**************************************************************************************************
Assembly Instructions
- Cut a length of filament to roughly the length of the case.
- place the top and bottom pieces of the case together
- feed the filament through the hinge(this might take some time and elbow grease depending on you printers tolerances, be patient and be careful)
- Cut the filament flush at the end of the hinges.
- Press 5x2.8mm Magnets into bottom and top parts of case (be very careful to get the polarity right)
- Youre Done!
TIP: if you are finding it difficult to insert filament hinge, pull it quickly through each hole individually a couple times, this will wear out the plastic and give you a bit more clearance.
**************************************************************************************************
Extras
- I added small felt pad on the walls and on the bottom where there are cutouts for the rubber grips. this is optional but recommended for a tighter more secure fit. there is also space on the lid for some felt to protect the screen, although the screen does not make contact with the case
TIP: do not use super glue to attach felt, glue stick works and wont damage your device.