Magnetic RG35XX H Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sleek an compact case for the Anbernic RG35XX, Simple and easy to print with no supports. Magnetic Lid.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 57
- Makes
- 0
- Views
- 373
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic RG35XX H Case
Recently discovered these anbernic devices and they are a game changer! Endless hours of fun in such a small device needs to be celebrated!
Created this case so i can chuck the console in my bag without worrying about scratches or it getting crushed.
**************************************************************************************************
Printing Instructions
- .20mm Layer height
- No Support, no brim(you might need it if you have problems with bed adhesion)
- Print flat side down
- For Multicolor prints, import top(with logo) as a object with multiple parts, apply color to the text and print as one piece.
- I used PLA, but you might want to try PETG if you really plan on tossing this thing around, or if you ever plan on leaving it in a hot car.
**************************************************************************************************
Assembly Instructions
- Cut a length of filament to roughly the length of the case.
- place the top and bottom pieces of the case together
- feed the filament through the hinge(this might take some time and elbow grease depending on you printers tolerances, be patient and be careful)
- Cut the filament flush at the end of the hinges.
- Press 5x2.8mm Magnets into bottom and top parts of case (be very careful to get the polarity right)
- Youre Done!
TIP: if you are finding it difficult to insert filament hinge, pull it quickly through each hole individually a couple times, this will wear out the plastic and give you a bit more clearance.
**************************************************************************************************
Extras
- I added small felt pad on the walls and on the bottom where there are cutouts for the rubber grips. this is optional but recommended for a tighter more secure fit. there is also space on the lid for some felt to protect the screen, although the screen does not make contact with the case
TIP: do not use super glue to attach felt, glue stick works and wont damage your device.