Counting matching models…
Print with the flat part of the grip on the print bed with supports. I used a threshold angle of 10 degrees with snug supports! Feel free to get this directly from me here: https://dildesigns3d.etsy.com
I designed this because the existing models on the internet were either paid or not well made. It fits snugly and does not slide off. The current version turned out to be slightly smaller than expected, but it still fits my (average size)…
A simple protective case for the Anbernic 35XX “H” handheld. Features: Slim profile hinge dual-latch closure cutout for USB-C charging while it's in the case View port for charging LED status while in the case and charging Prints easily…
I wanted some better ergonomics while I played my games. I remixed the grips from STR to fit the RG35XX. It's a snug fit. Printed in PLA with supports on build plate.
The Anbernic RG35XX H is a retro handheld emulation game console that runs on Linux. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective…
This case is made of two halves that can be connected with either a length of filament, or the use of #16 finish nails as “hinge pins” to connect them together. The case features a slot in the back to use as a display stand when not being…
IF YOU NEED THE EPIC ULTRA FOR THE "RG351MP" ( Metal Plus) FOLLOW THIS LINK!!!: https://www.printables.com/model/240177-anbernic-rg351mp-game-pad-epic-ultra Please respect the Licence the thing comes with! Thanks Thanks to Thingiverse…
Print this with the top side of the clip down. I printed with supports with a 10% support angle threshold. You shouldn't need a brim depending on your plate, but I printed previous versions with a brim just to be sure! Feel free to get…
In collaboration with HyperPlay RPG , I have designed a grip for the RG35XX H games console. Print with supports 15% infill 0.2 mm layer height See HyperPlay RGP's review of the grip here: I also sell this on my website and Etsy store ,…
This is a simple stand for the Anbernic RG35XX. I was having some trouble with bed adhesion so I added tiny tabs on the corners that are easy to cut off and added that as a second STL file. They are 0.15mm tall so they should only be 1-2…
A comfort grip (for when the device is opened/in play) and a standing case (for when the clamshell is closed) for the iconic Anbernic RG35XX SP. It has access to all the ports on the side and bottom of the device. It can be printed with…
Information about the model: Inside the case there is about 1mm of play on each side so that foam rubber or similar damping can be attached. The lower shell (Part_2) has an elevation so that the shoulder buttons are not pressed in.…
Anbernic RG351p case. Designed to be printed as one model without supports The height of the case is made to add the original white foam that is added in the box with the console. If you don't have this foam the console rattles a little…
If you like this model, show some love, hit the like button. Version 2 of the ergonomic grip for the Anbernic RG 35XX (RG35XX). Now has rounder corners for comfort and different printing orientation. Print in PLA Needs supports
The Anbernic RG35XXSP is a retro handheld emulation game console that runs on Linux. It's design is boxy and this is for people who want a little bit more grip to the console, but still keep the slim and portable nature of the console. I…
A simple stand base for the Anbernic RG40XXV. (3 variants: simple, "RG40XXV" inset text, "RG40XXV" outset text). In the picture you can see it printed in White PETG (PLA works too), 0.15mm layer height (you can go higher but you will get…
This case is made of two halves that can be connected with either a length of filament, or the use of #16 finish nails as “hinge pins” to connect them together. The case features a slot in the back to use as a display stand when not being…
Clean display stand for this amazing little machine
Please respect the Licence the thing comes with! Thanks Thanks to user "Threat_Craft" who test printed the prototype, provided pictures and the dimensions so I was able to adapt the epic ultra to the RG353m as I don't own it myself.…
Used PrusaSlicer to customize the RG35XX stand made by jlips. The Anbernic logo is borrowed from the boot logo I'm using for a different look. I also added negative volumes on the bottom for rubber bumpers I had laying around to ensure…
Prints fine without supports. Turn on ironing to clean up the inside faceplate that actually makes contact with the rg353v. I used a roll of felt tape to line the inside from amazon. This is really rough as this is my first remix but…
The Anbernic RG405M is a retro handheld emulation game console that runs on Android. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective…
This is my attempt to make a grip to make the win600 a little more comfortable and usable. Its not perfect by any means, and likely would be best used with stick covers, but it is a large improvement over stock. The fit is intentionally a…
3D printable dock designed for the Anbernic RG353V handheld gaming console. This dockholds the console during storage or charging. The dock includes a channel for a type c cable. Prints fine without supports.
An all 3D printed case for the Anbernic RG35XX Plus. No screws are needed for the assembly. if you a short cable or a fiber cloth you might be able to store it ind the case to :) When printed, just put the lid on and put some 1,75mm…
IF YOU NEED THE EPIC ULTRA FOR THE " RG351P or M ( Plastic or Metal) FOLLOW THIS LINK: https://www.thingiverse.com/thing:4702672 !!WARNING!! After placing your RG351MP into this game pad holder, be prepared that you never ever want to…
These are some custom replacement buttons I made for the Anbernic RG35XX.
Feel free to use this to develop your own accessories!
A simple stand for the Anbernic SP
Print in TPU with supports nice and slow with the flat side down! I used a 10% support threshold. If you want to buy this from me or want to support me, follow this link here: https://dildesigns3d.etsy.com
This model was remixed from ScottMuc's Anbernic RG405M Shoulder Buttons , scaled and edited to fit the RG505, although its recommended to print with SLA printers, I printed mine with FDM (Kingroon KP3S) and there were zero issues with…
I designed this stand for my Anbernic RG405V but I do believe this would work universally for any Gameboy styled handheld retro gaming device or cell phone. It also includes a cut out for a power cord to come up through the bottom. It was…
Display stand for the retro gaming devices Anbernic RG353V and RG353VS.
Grip, front cover and stand for the Anbernic RG351V retro gaming handheld. The grip makes longer gaming session more comfortable without blocking buttons or connectors on the bottom of the device. The front cover protects the screen, top…
Mount for the RG351P on the Ikea Skadis
DISCLAIMER: Modding your electronic devices can be dangerous, and you may end up damaging them. Use at your own risk. The author of this publication is not responsible for any damage caused as a result of using these models. Protection…
This grip is for the Anbernic RG35XX H, making it more comfortable to hold while you game. Its ergonomic shape helps reduce hand fatigue during long sessions and gives you a better grip, so it’s easier to enjoy your games without your…
I liked the feel of @dildesigns ergonomic grip and the sleekness of @m00nd0gg slide on design , so I hacked them together to create this slide on ergonomic case for the Anbernic RG35XXH. I printed in PETG, 15% gyroid infill, and supports…
This is a snap case for the Anbernic RG353v. It's meant to be felt lined to protect the device and to create a tight fit. I used 1.2mm x 31.8mm wire brads for the hinges.
This is a grip for the Anbernic RG35xx. It's got long handles for people with larger hands. Edit: Adds a v2 with a stronger grip on the console and a rounded bottom so it doesn't cut into your finger as you play (sorry about that with V1)…
I made this case from scratch in OnShape for an Anbernic RG353M Print with bed supports. 0.2mm I used 3 walls, but 2 could probably work. Use 1.75mm filament for hinge joint Use Felt sticker inside to protect screen. You could also line…
The case fits 1x RG351MP and 2x micro SD cards Non-printable parts: 12x ⌀4mmx4mm magnets 2x button head wood screw 3mm x 20mm to 40mm in length a little bit of glue No supports are needed. Control dimensions of handheld before printing…
THIS IS A WORK IN PROGRESS Some custom grips for the Anbernic RG505. I made the grips massive for my big hands. They work great for making the analogs way more comfortable to use, but the shoulder buttons are simply too far away from the…
Finally done, a nice comfortable grip for your original RG350. The base for the design was a very ruff 3D scan of a Xbox 360 controller I found online. You need some sponge rubber or thin felt for the sides, as this Gamepad secures your…
Ich habe das Modell von Whity angepasst, damit es für den Anbernic RG351M passt (aufgrund der ähnlichen Abmessungen könnte das Case auch für den RG351P passen). Damit auch anderes Zubehör wie Kabel oder SD-Karten, Adapter, usw. Platz…
A nice comfortable grip for your original RG350P and RG350M The base for the design was a very ruff 3D scan of a Xbox 360 controller I found online. You need some sponge rubber or thin felt for the sides, as this Game pad secures your…
I know you always wanted to display your Anbernic RG35XX! Now you have a chance to have very nice stand for your favourite handheld. BUT REMEBER ABOUT THE DUST ABRASION! What I used? Here: Printer: Creality Ender 3 V2 Neo. Nozzle: 0,4 mm,…
Handle for the Anbernic RG35XX Plus
Grip, front cover and stand for the Anbernic RG300 retro gaming handheld. The grip makes longer gaming session more comfortable without blocking buttons, connectors at the bottom of the device or the volume wheel on the side. The front…
This is a snap case for the Anbernic RG35xx and RG35xx Plus. It's mean to be used with flet lining to protect the device completely. I used 1.2mm x 31.8mm Wire Brads for the hinges. Depending on your printer tolerances, they should be…
This is a simple stand for the Anbernic RG40XX-H. It includes a small nub that utilizes the 3.5mm headphone jack to keep the device centered in the stand. Printed with 0.4mm nozzle and 0.2mm layer height.
Rework off Tomunderwood's Gameboy Advance SP Rugged Case to suit the Anbernic RG35XXSP
Comfort grip for Anbernic RG351V model. Ergonomic design makes game play more comfortable. Hole on bottom allows you to charge or plug in headphones without the need to remove the grip. Designed using TinkerCad
I made them with fuzzy skin in mind, so the tolerances are jank, and you may need to trim the smallest bit off the edge with a razor. I really wanted to make sure the L2 and R2 wouldn't also click the L1 and R1 buttons, and this was the…
Thinner version of https://www.printables.com/model/829340-anbernic-rg35xxh-bumper-case with cutout in the back.
Mostly accurate reference model for the Anbernic RG35XXH.
I just resized the original rugged box (see remixes) for the Anbernic RG 35XX SP dimensions with a little extra rom for some foam or other kinds of protection
Print with the flat side against your build plate, supports will not be needed. The case is designed to be used with the foam insert that the RG35XX ships with, I attached mine with a little glue. If you don't have the foam it shipped…
This is a remix to fit the Anbernic RG35XX plus. The original RG35XX is 2cm thick and the plus version is 2.2cm thick.
Perfectly fitting hinged case for the Anbernic RG35XX Plus.
A very slim and stylish Case to protect you RG351P. ( still waiting for my RG351M to test if it fits as well, it should but cannot say for sure until I was able to testfit) It comes in two versions, with and without an USB pass through.…
Needed a Skadis Mount for my Anbernic RG35xx H. The original model was to wide for the RG35xx H, which is why I remixed it to have a better fit. I just made it about 5mm narrower, it fits perfect now. If you'd like to print the model…
!!WARNING!! After placing your RG350P into this game pad holder, be prepared that you never ever want to play in a different way. After experiencing the comfortable grip it will feel all wrong to you using your device without it! You have…
!ATTENTION!_ EXPERIMENTAL_DESIGN! (Print if you dare!) When I did some prototyping for the RG351p gamepad holder a print failed midway as for some reason the print head must have pumped into the print and went on shifted, until it was…
Ikea Skadis holder for Anbernic RG35XX or RG35XX Plus. Charge port is accessible from the bottom. Support needed for middle hook only.
Link for grip : https://www.printables.com/model/469500-anbernic-rg353vs-grip
A simple hand grip for Anbernic RG34XXSP. Add some foam pad for perfect fit. Inspired by https://www.printables.com/model/51459-geta-grip . Category: Toy & Game Accessories
The RG477M is an amazing handheld (if you can live with the fan…), but it's not super comfortable. I made a comfort grip. It's not the most elegant model as I designed it in Tinkercad, and it prints a bit rough, but it does make longer…
I just purchased an Anbernic RG35XX Pro and wanted a way to securely carry it in my backpack when I travel. Similar to the original, you'll need six (6) M3 25mm. There are approximately 2mm of space on all the edges for adding padding.
This is for the RG35XX+, I don't think it will fit the original RG35XX. Included the SolidWorks file if anyone wants to make edits.
Hi i designed this simple controller grip for the anbernic RG35XX H. It just fits snug with the console and does not cover the buttons. One has cutouts for the speakers and sd-card slots and the other one has no cutouts.
AAAAAAAAAnd yet another holding device for the RG351P. This time not as fancy with a more practical approach in design. It is super low profile and even so it does not look like very comfortable, it actually is an pretty welcome…
Designed after the work of IamDroBro (and mb also Emotional-Priority49) on Reddit for the RG35xxsp. Hardware required: 4x M3x8-12mm countersunk bolts 4x 4.5mm(w) x 5mm(d) M3 threaded heat inserts 4x 5-8mm x 2mm rubber pad feet/bumpers 1x…
I made a protective cover for my Anbernic RG35XX H Hand-held. Unlike alternatives this cover allows me to always keep cards with firmwares and games next to the hand-held. Also, there are some minor elements improving overal convenience…
To adhere the logo well, use support in the lettering area.
A little desk holder for an Anbernic rg35xxsp. Print in place.
!!WARNING!! After placing your RG350 into this game pad holder, be prepared that you never ever want to play in a different way. After experiencing the comfortable grip it will feel all wrong to you using your device without it! You have…
Designed after the work of IamDroBro (and mb also Emotional-Priority49) on Reddit for the RG35xxsp. This dock suits the RG35xxsp - check your model no. Hardware required: 4x M3x8-12mm countersunk bolts 4x 4.5mm(w) x 5mm(d) M3 threaded…
I couldn't find a stand for the RG35xx plus. So I designed this one in Onsdel (FreeCAad)
Nothing special but displays the SP in your collection.
I made a stand for my Anbernic RG35XXH its super simple but works and should be a pretty quick print.
The model was based on https://www.printables.com/model/1152772-honeycomb-storage-wall-anbernic-rg35xxsp-mount. Thanks to the author @SamuraiLink3. Print settings Support: Yes Filaments: PLA, PETG Fill: 15-20%. Perimeters: 3
Designed in FreeCAD. Use for reference or just having fun. Not totally exact.
A simple Gridfinity Bin for the Anbernic RG35XX (Plus). Two by One Tiles. Slight lean to the back.
The initial case design provides good protection and functionality but is large and has a sharp edge at the bottom near grip areas. As a result, I put my fingers in less comfortable positions to not feel discomfort from the sharp edge.…
I wanted a cover for my Anbernic RG35xx to protect it and make it a little easier to slide in and out of my bag. This cover is intended to re-use the insert that came in your original RG35XX H packaging, but if you're a normal person who…
A simple holder for a favorite retro game emulator.
A compact and stylish Case to protect you RG351P and some accessories. It comes in two versions, with and without an USB pass through. A snug and secure fit for the 351P, charging cable, fiber cloth , wifi dongle, USB C to A adapter, etc.…
remixed for honeycomb wall storage -untested-
A 3D printable rear shell for the Anbernic RG Cube XX which allows up to four 18650 battery cells, for an effective 4x increase in battery life (I got 18 hours in performance mode). The shell maintains the same footprint and dimensions as…
I mounted it to wood using 3x16mm screws.
This is a Anbernic RG353m slip case. It's meant to be used with felt lining to protect the device. Make sure you line all sides inside the case and the bottom bumber inside the case.
A grip to help with a little hand fatigue and placement
Hier ist ein einfaches, praktisches Case für den Anbernic G350 – perfekt für unterwegs oder zur sicheren Aufbewahrung zu Hause. Der Handheld sitzt schön fest im Case, und im unteren Teil gibt’s sogar ein kleines Fach für eine…
I wanted to be able to have my RG353V plugged in and charging while on the stand, so I designed a slot that matched the port cutout in the grip (LINK here ). I also wanted to incorporate the Anbernic logo into design.
Place bottom of the print on the build plate. Used 0.2 layer height with 10% infill.
An AI generated (then somewhat accurately scaled) mockup model of the Anbernic RG477V. For people that want to know what it's like to hold and for test fitting in cases, etc. Printed a correctly scaled image to stick on it's face. I have…
Anbernic RG35XX SP RG35XXSP
This is a Honeycomb Storage Wall mount for the Anbernic RG35XXSP. There's not much to say about this one, its a simple box that can attach to HSW inserts and holds your handheld securely. Print Settings Support: None Filament: (almost)…
SD card holder for the Anbernic RG35XXSP. Replaces the existing battery cover. VERSION 2.0
