Cursed Connectors: H2O to HDMI Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printed garden hose to HDMI adapter for a powerful streaming solution. Dispense high bandwidth water!
- Ocena
- 5 / 5
- Polubienia
- 250
- Pobrania
- 199
- Wydruki
- 1
- Wyświetlenia
- 5292
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
Introducing the first in my Cursed Connectors series: the H2O to HDMI Adapter! This 3D printed garden hose to HDMI adapter is the ultimate powerful streaming solution. Dispense high bandwidth water with this cutting-edge adapter.
Design: This whimsical connector features a garden hose fitting on one end and an HDMI plug on the other. It’s crafted to look like it could actually bridge the gap between your garden and your entertainment system. Does actually work as a hose-end nozzle to spray water out in the shape of an HDMI connector, although you may wish to use a rubber hose washer inside to get a good seal (or print one out of TPU, example included).
Amuse your friends with this innovative solution to their streaming needs. 3MF and STEP file included.
Printing
Material: Printed here with durable ASA, this model can be as robust as it is absurd. PLA/PETG can work too.
Layer height: Prints well at 0.16 or 0.12 layer height here in ASA. You probably want thinner layers for good threads. If you have not shrink-corrected your ASA printing profiles, you may need to enlarge the model to ~100.7%. Should just fit for PLA/PETG prints.
I recommend printing HDMI-side down on the bed.