1 / 3
Enclosure Mod for Tina 2, Tina 2 Wifi, and Tina 2 Plus. To keep plastic in, and shop dust out. — zdjęcie 1
1 / 3

Enclosure Mod for Tina 2, Tina 2 Wifi, and Tina 2 Plus. To keep plastic in, and shop dust out.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An Enclosure mod for the Tina 2 line of 3d printers.

Ocena
0 / 5
Polubienia
27
Pobrania
146
Wydruki
0
Wyświetlenia
1200
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I use Tina 2 3D printers in my workshop to print brackets, and so I made an enclosure to keep the plastic fumes in and the shop dust out!

The back acrylic window should be cut to 109mm by 109mm

The front window should be cut to 132mm by 144mm with a 12mm radius on each corner if I recall correctly.

The front uses 6mm magnets heat-pressed into the plastic.

Tagi