1 / 2
PTFE Tube Adapter 6mm OD to 4mm OD — zdjęcie 1
1 / 2

PTFE Tube Adapter 6mm OD to 4mm OD

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for connecting 6mm OD to 4mm OD PTFE tubing. Made to connect Polymaker Polydryer Box to reverse bowden.

Ocena
4,857 / 5
Polubienia
74
Pobrania
471
Wydruki
7
Wyświetlenia
1329
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Adapter for connecting a 6mm PTFE hose to a 4mm reverse bowden PTFE tube.

The holes are 4.1mm or 6.05mm in diameter and approx. 10mm deep. They therefore form a friction fit after contraction during printing.

A conical area is provided between the holes to allow the filament to pass through cleanly. 

The slit in the internal geometry is intended to place the seam. An alternative model is included but using it might result in a tighter fit.

The spiral pattern creates the surface effect. See the Fine Structured Surface Test Models for more information on that.

The G-Code file was sliced with Orca-Slicer for the Prusa i3 MK3s and Das Filament - PLA - Schwarz matt.

The included 3MF is an Orca-Slicer project file.

STEP files included.

Tagi