1 / 2
Miele Dishwasher Foot Extension — zdjęcie 1
1 / 2

Miele Dishwasher Foot Extension

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An extension block for the feet on a miele dishwasher. Fits on the bottom of the existing feet.

Ocena
5 / 5
Polubienia
7
Pobrania
99
Wydruki
1
Wyświetlenia
405
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Extension feet to go under the existing Miele dishwasher feet to allow the dishwasher to be raised further. Miele do sell longer legs but they cost a fortune (about 30euros per leg). These are useful for either raising a dishwasher further or if you have them nearly fully extended you may just want more of the leg in the dishwasher thread so the leg is less liable to break off.

Extension provides 25mm additional height, the FreeCAD file is provided if you want to increase this further.

Printed succesfully in PETG with 15% gyroidal infill which seems sufficient.

Tagi