1 / 2
Miele Dishwasher Foot Extension — image 1
1 / 2

Miele Dishwasher Foot Extension

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An extension block for the feet on a miele dishwasher. Fits on the bottom of the existing feet.

Rating
5 / 5
Likes
7
Downloads
99
Makes
1
Views
400
Reviews
2

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

Extension feet to go under the existing Miele dishwasher feet to allow the dishwasher to be raised further. Miele do sell longer legs but they cost a fortune (about 30euros per leg). These are useful for either raising a dishwasher further or if you have them nearly fully extended you may just want more of the leg in the dishwasher thread so the leg is less liable to break off.

Extension provides 25mm additional height, the FreeCAD file is provided if you want to increase this further.

Printed succesfully in PETG with 15% gyroidal infill which seems sufficient.

Tags