Corner Bracket for 3x1 Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this bracket to allow joining 2 boards at a right angle.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this bracket that allows joining 2 boards at a right angle to create a barrier preventing my dog from losing toys under our entertainment center. I got tired of playing fetch myself so wanted to create a boundary using 3x1 wood (18mmx61.25mm actual size).
Decided to make these corner clips instead of using screws so I would not have to move the entire piece of furniture to vacuum underneath as I had cut the wood to fit snug. There are screw holes available to attach to one board if desired.
Profile is for PETG but could easily be made from PLA if it won't receive too much abuse. I suppose ABS/ASA would have been even better but I don't currently have an enclosure.
STL included in case the 3mf file is not compatible with your slicer.