Cuisinart SM-50 worm gear replacement part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A worm gear replacement you can print if you have a Cuisinart SM-50 stand mixer that needs help mixing !
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 307
- Wydruki
- 0
- Wyświetlenia
- 1249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
I have a Cuisinart SM-50 stand mixer and it stopped working properly after a few years. It felt like a “clutch” with the mixing part not spinning while the engine was speeding up.
One gear in the main gear train is made of plastic/resin instead of metal. I could not find any schematics or replacement part online for this model. Some might say it's on purpose so you have to bring it to a Cuisinart specialist…
Anyway, I managed to isolate the specific issue, and modelled this replacement part. I printed it in PETG with 100% infill, and the mixer works perfectly now. I'm uploading this part so it could be useful if you want to save some money.
Print parameters
- PETG recommended
- 100% infill recommended
- 0.28mm layer height
Files
- The raw file is a perfect fit, with no tolerances. You might have some issues depending on your print
- The 0.2mm offset is the one I used for the fix and it worked perfectly in my case