69 modeli
I have a Cuisinart SM-50 stand mixer and it stopped working properly after a few years. It felt like a “clutch” with the mixing part not spinning while the engine was speeding up. One gear in the main gear train is made of plastic/resin…
I loved @BrookTrouts knife cover, and my wife was trying to get rid of the giant waste of counter space that is known as the "knife holder blob". So, I measured a few times, and came up with these. I recommend you measure your knife, then…
I had the misfortune of getting a stirring tool caught in the mixing mechanism of my Cuisinart Stand Mixer, which then stripped out the plastic Helical gear in the drive system. I'm sure it was made in plastic to do such a thing, but…
This is a container to store Cuisinart food processor blades. It accommodates an arbitrary number of 150mm disc blades, two DLC-10 FP-100TX steel blades, and two disc blade mounts. The Solidworks file is built with equations. Open the…
Replacement power button for a Cuisinart griddle. Printed horizontal (power symbol facing the front of the printer) with supports so the two tabs on the side didn't break off when flexing. I do not wish to receive tips from any of the…
This is a modified version of the Cuisinart ICE-21 drive gear posted by Isaac Anderson . I repaired some geometry errors that were being reported by PrusaSlicer, as well as put some holes in it to reduce printing time and material. It was…
Replacement lever handle for the Cuisinart ‘Custom Select’ toaster, and likely others as well. Printed in PETG without supports. Orient with the front of the handle on the build plate.
A remix of calebfwood's 4-blade storage case to safely hold these razor sharp and oddly-shaped cutting tools. Our food processor has only two blades, but we wanted to store the "stem" that holds them alongside the blades themselves, so I…
The knob of my Cuisinart Griddle broke and I designed a replacement. Print it sideways to make the snaping parts stronger. I printed it in PETG. Print instructions Category: 3D Printing Summary The knob of my Cuisinart Griddle broke and I…
Replacement Power Button for Cuisinart GR-5B Electric griddler. If the stem is a big too long cut small ~1mm chunks from it
A remix to better fit all the accessories coming with the Cuisinart DLC-8SBCYP1 Pro Custom 11-Cup food processor. It's also smaller and uses less filament than the original. Printed on a Creality Ender 3 v2 with Hatchbox PLA.
Holder for Cuisinart DFP-14BCWNY 14-Cup Food Processor slicing disc and shredding disk as well as the plastic stem adapter thingy. Print instructions Category: Kitchen & Dining Summary Holder for Cuisinart DFP-14BCWNY 14-Cup Food…
Wall mount holder for the Cuisinart Stick Blender RHB-100XA. Please note that the model differs slightly from the photos - the holder has been extended by 5mm to give the USB charge cable additional space (the cable was rubbing on the…
Use at your own risk. I accept no liability if this is printed and used to bypass safety mechanisms of a Cuisinart DFP-14BCNY 14-Cup Food Processor. Seriously, this is dangerous. Only included here to illustrate the geometry of the safety…
Here in Washington State we have quite an infestation of stink bugs going this year. My wife, normally quite disinterested in my 3d-printing habits, commissioned this hack after discovering one of the disgusting critters hiding inside of…
Designed for the Cuisinart FP-12. Will hold the slicing and shredding discs and either one of the two chopping blades (keep the second one in the bowl). Okay, no space for the dough blade -- because I've lost mine. Print instructions I've…
My Cuisinart raclette grill knob broke in half, so I designed a replacement! Print with brim and supports on the outside (not the center hole, not necessary). Re-use the metal clip from the original and install with long-nose pliers.…
This is a remix of the spoon holder by DanLuc: https://www.thingiverse.com/thing:994032 . My Cuisinart DBM-8 Burr Grinder has a measuring spoon that is 18mm wide on the handle/brush end. The spoon would not fit into the original model…
This food processor doesn't come with any sort of holder or caddy for its slicing/shredding attachments. So I designed a 3D printable option. Each holder requires the following metal parts: 3pcs M4x12mm socket cap head screws 3pcs M4x7mm…
Tired of refilling your meager 8-oz bean hopper three to four times a week? Yearning for nearly limitless bean storage? Look no further! Extend your Cuisinart Grind and Brew bean hopper to whatever height works for your cabinets. The…
I guess we through the lid in the recycler… So here is the replacement part for a Cuisinart Coffee Grinder
Print using 15% infill PLA standard 0.4mm nozzle settings on Prusa Slicer
This is a custom holder for these Cuisinart 12 cup accessories: FP-12RSD reversible shredding disk (180 mm diameter, 10 mm depth) FP-12ASD adjustable slicing disk (180 mm diameter, 22 mm depth) FP-12STM stem adaptor (2) (18 mm diameter,…
This is a replacement for the Cuisinart CRC-400 and CRC-800 rice cookers lid handle that is known to break easily. This part gets hot, so make sure you print with a plastic that can handle some heat like PETG, avoid PLA. Print…
The opening of the coffee bean hopper on the Cuisinart Grind & Brew is very small making it difficult to fill. This simple funnel fits in the top of the hopper and provided a much wider opening to avoid “spilling the beans”.
I designed this end guard to protect non-stick pots from the metal end of a Cuisinart Immersion Blender (Model#: csb-76bc). As this guard may fit other immersion/stick blenders, the relevant dimensions are: Outside diameter of blender…
Replacement knob for Cuisinart griddle/grill. Use the existing metal strip from the old knob and press it into place on this. I printed in ABS because that was the only black material I had. Should work well in PETG but stay away from PLA…
Join my friendly 3D Printing Facebook Group . Life is full of joys, such as bread makers and children. Sometimes, worlds collide, such as bread makers and children. Unbeknownst to me, my bread maker was missing one of its rubber feet,…
This model holds the 2 included Cuisinart blades vertical, or with double stick tape or 3m Command strips, on the inside of a cabinet door. These blades are a pain to keep in the drawer or cabinet due to sharp edges and taking up too much…
See video for details
This is a variant of the food processor blade holder published by futur3gentleman. The blades used with the 14 cup model of the Cuisinart food processor were larger than would fit in the original design, so I recreated it to accommodate…
The gf said the Cuisinart ICE-30BCP1 Ice Cream Maker 2-Qt would accumulate dust and dog hair inside when left unused in storage for awhile as there is an open hole (by design) on the top. This simple lid fits over it to prevent anything…
The paddle on my mixer was too far from the bowl, and the adjustment screw was already maxed out. This spacer increases the bowl height by 3mm.
Cuisinart Pressure Cooker Condensation Collector Model EPC-1200PC Found one of these at a yard sale and it was missing the condensation collector. Yeah, you can buy one from Cuisinart I suppose but it didn't look right, so I whipped up…
This is a replacement safety lever for the bowl lid of a 14 Cup Cuisinart model DFP-14BCNY. The one on our 3 year old food processor was cracked and about to fall to pieces, so I designed a new one. For a $320 appliance, this part is…
Replacement Kettle knob that broke off along with a screw to install it.
Here a knob replacement for a Cuisinart raclette grill as the original knob easily brake. Print upside down (pin hole on top). No brim required.
Just a little cleaning tool for Cuisinart burr grinders:…
Was designed for TPU, 20-30% infill, 3 walls, .2mm layer height. PLA or other materials won't work.
Wife broke can opener crank. In a bid to fend off starvation and marital strife, I made a quick replacement. Print Settings Printer Brand: RepRap Printer: Makerfarm i3v 8 Rafts: No Supports: No Notes: Printed in PETG. I really need to…
This storage box is for the Cuisinart 14-cup steel chopping blade (Model: DLC-001TXB, Example: https://amzn.to/3SVcnze) which fits onto their 14-Cup processor models: DFP-14BWN, DFP-14BCWNY, MP-14N, MP-14, DFP-14BCWN, DLC-2014N,…
There were similar models online but were much bigger and couldn't really reuse the existing rubber seals so I made this. Printed in PA6-GF25 because I wanted something with a lot of temp resistance. 4 perimeters Supports underneath…
Made for use with the Cuisinart Single Serve Grind and Brew Coffee machine, this will hold the HomeBarista Reusable Filter Cup in between uses. It may hold the insert, i haven't tested to see. Made out of PET-G. There is a magnet on the…
This is a replacement cap for a Cuisinart food processor cover. The diameter of the hole in the cover is 46mm. Category: Kitchen & Dining
Fits into the drip tray holder, place the stock metal grate on top. Print with 0% infill, 3 or 4 walls, 0 top layers. Cuisinart Coffee Maker, Single Serve 72-Ounce Reservoir Coffee Machine, Programmable Brewing & Hot Water Dispenser,…
I needed a extension to position my favorite coffee cup in the single cup brewer to prevent excessive splashing.
The rubber feet fell off of our Cuisinart CPK-17 kettle, which made it very wobbly. I messured and sketched this out in OnShape, then printed in TPU. This fixed the problem.
After my eggs are cooked I like to keep them on the tray but there's no place to put it while its holding eggs except the cooker. This is like a multi-egg egg cup. I printed in ASA to be more heat resistant when washing, no support…
Pretty basic. Let me know if you have any questions. It probably could have used more bevel on the edges, but it worked so I will leave it at that.
Removable blender lid insert for Cuisinart CBT-2000C (Hurricane). Allows addition of ingredients during the blending process. This may work for other blenders, but I created it specifically for the above model. Printed in PETG, Bambu…
The Cuisinart HP-400PC immersion blender comes with a bunch of accessories. One of the included accessories is a mini food processor with both a blade and a shedding/slicing disc. Only one of these can be stored inside of the food…
The only tricky part with this print is the hinge pin. It might require some sanding down to slide into the the hinges.
This model is a rubber foot for the Cuisinart Snow Cone Maker. To attach, place the print where the rubber foot should be. Then, super glue it.
A remix of @Colin_40440 's and calebfwood's 4-blade storage case with a dedicated dough blade and stem storage component, and a (new) dovetail connection to assemble with the original model. I've included the same dovetail geometry…
This is a 3D-printed adapter for the Cuisinart DGB-550BKP1 Automatic Coffeemaker Grind & Brew ( Amazon link ). It replaces the entire bean grinding mechanism when you want to use the “Grind Off” feature for pre-ground coffee. The adapter…
This is an insert for the Supreme Grind mill. It allows for the direct fill of the Moka Pot filter cone. I used fusion 360 to model this. For my purposes I designed based on a 62.05mm diameter filter, (maximum) for the grinder receptacle.…
Knife Block for Cuisinart Knife Set #17550F. Holds 8in Chef, 8in Slicing, 8in Bread, 6in Santoku, 6in Serrated, and 3.5in Paring knives.
This tiny part makes your whole food processor stop working unless you buy a new bowl — because of course it's not sold separately. This is a replacement for the small safety latch linkage arm inside the work bowl handle — the part that…
The current lever is very difficult to turn, this lever slips right over the current one and adds the leverage needed to turn on or off steam/water. *Note the lever hole is asymmetric, it is larger on one end to slide further onto the…
This print in place replacement lid is more durable because of the single piece design with reinforcement in a few places. The function of the button is slightly modified. I recommend printing with ABS and using a fume bath to smooth the…
I lost my plunger for my Cuisinart DLC7 food processor and made this one by looking at some photos of replacement part. I printed using PETG but if you have ABS it would probably be better. I printed 100% infill with top side down,…
My Cuisinart DLC-10 Plus came with an organizer to hold the slicing disks, but no place to store the dough hook and the slicing stem. This attaches to that organizer and gives me a place to put them. Print Settings Printer Brand: Prusa…
This knob was mad specifically for the Cuisinart CPT-90 model toaster which is a 4 slot model. This may also fit the two slot model but don't have to try it. Our old knob got wore out and kept falling off. I made the tolerances on this…
Replacement grounds box for a Cuisinart coffee grinder. The original was slightly too large so I scaled it to fit. I beefed up the bottom lip and the part which engages the safety cutoff switch. I printed this in clear PC/PETG blend on a…
Version with more clearance for the disks
I really liked the look of the blade holder designed by @jepler_5779, and appreciated the full coverage of the one slicing blade with the exposed serrated knife edge that always freaked me out a bit when digging through stuff. The only…
My Cuisinart DLC-10 Plus came with an organizer to hold the slicing disks, but no place to store the dough hook and the slicing stem. This attaches to that organizer and gives me a place to put them. Print Settings Printer Brand: Prusa…
Knife Block for Cuisinart Knife Set #17550F. Holds 8in Chef, 8in Slicing, 8in Bread, 6in Santoku, 6in Serrated, and 3.5in Paring knives.
I needed a extension to position my favorite coffee cup in the single cup brewer to prevent excessive splashing.
![Cuisinart 14-cup Food Processor Organizer [Modular Version]](https://media.printables.com/media/prints/31995847-c2f6-44e1-9256-6ccaab25d990/images/9631405_c3759c49-5c4a-4bdb-bf4d-4ef5aebf82b8_69bc5538-f978-41f5-b6ac-2a007951eeda/20250429_120155.jpg)
![Cuisinart 14-cup Food Processor Blades and Stem Organizer [increased clearance]](https://media.printables.com/media/prints/865313a7-0bd3-4f1a-8e0b-f184f0d86c8d/images/13622945_5b4ffded-a736-473a-bc50-a4391a3525c8_050f5b92-c830-4857-b11e-3dc10fa10668/pxl_20260820_204402560.jpg)
