Cuisinart DBM-8 Burr Grinder Coffee Measuring Spoon Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the spoon holder by DanLuc: https://www.thingiverse.com/thing:994032. My Cuisinart DBM-8 Burr…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 635
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the spoon holder by DanLuc: https://www.thingiverse.com/thing:994032.
My Cuisinart DBM-8 Burr Grinder has a measuring spoon that is 18mm wide on the handle/brush end. The spoon would not fit into the original model (iirc it has ~15mm opening), so I made some adjustments to get the fit where I wanted it.
This remix's dimensions are as follows:
X - 24.5mm
Y - 20.63mm
Z - 15.47mm
These values represent a scale factor of 128.95% (based on the original model).
Attaching to DBM-8:
My DBM-8 does have magnetic sides. The magnet hole on this remix is ~8mm, which is larger than the hole on the original model. I printed this model with supports to account for the increased size, but I did not test or use magnets to attach the holder to my DBM-8. Instead, I attached using 3M double-sided mounting tape. It's still holding firm after a couple days.
Print Settings
Printer Brand:
Printer:
Rafts:No
Supports:
Yes
0.2mm
Infill:
5%
Filament:
Prusament PLA Galaxy Black
Category: Kitchen & Dining