Cuisinart 14-cup Food Processor Organizer [Modular Version]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cuisinart disk blade storage, now with (optional) dough blade and stem storage.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
A remix of @Colin_40440's and calebfwood's 4-blade storage case with a dedicated dough blade and stem storage component, and a (new) dovetail connection to assemble with the original model. I've included the same dovetail geometry separately as their own meshes, to facilitate additions by others.
Note: this model was designed based on the 7-cup (DLC-10) stem and dough blade, I THINK the 14 cup models are similar enough to work, and based on Cuisinart's website, disk-blade holders should work for most classic model disk blades, but YMMV.
The tolerances currently work well on my own printer, leave a note if they don't work on yours and I will try to update the model accordingly.
Note for further remixes:
The dovetail surfaces are not parallel - there is a draft introduced on the male component, which tightens the joint as it is pushed together. The dovetail angle from vertical is 34.3 degrees.
StemAndDoughBladeCase - This is the new model with storage for the blade stem and Dough blade
CuisinartBladeCaseWithDovetail - This is the original model from calebfwood and is the suggested companion print to the new stem and dough blade case.
BladeCaseStemOrganizerAndDovetail - Legacy component from @Colin_40440, which includes the dovetail but also ends up doubling the stem storage. (included here in order to give them proper credit for the idea)
DovetailForCuisinartBladeCase - Isolated male dovetail geometry
FemaleDovetail - Isolated female dovetail geometry (dovetail angle from vertical is 34.3 degrees)