1 / 7
Cuisinart DGB-550BKP1 Grind-Off Adapter – Brew pre-ground coffee without the Grinder Mechanism — zdjęcie 1
1 / 7

Cuisinart DGB-550BKP1 Grind-Off Adapter – Brew pre-ground coffee without the Grinder Mechanism

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cuisinart DGB-550BKP1 Grind-Off Adapter – Brew pre-ground coffee without the Grinder Mechanism

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

This is a 3D-printed adapter for the Cuisinart DGB-550BKP1 Automatic Coffeemaker Grind & Brew (Amazon link).

It replaces the entire bean grinding mechanism when you want to use the “Grind Off” feature for pre-ground coffee. The adapter is a simple collar and pin system that depresses the built-in safety switch, which normally requires the grinder mechanism to be in place. This lets you brew without the grinder in place, while still keeping the lid closed to protect the water reservoir and grinding area.

Why use it? Without this piece, you have to leave the grinder installed even when it’s not being used. That means it still gets dirty from steam and stray coffee, which is annoying to clean. If you own this Grind-and-Brew unit, you will understand both how good it is, but also how many pieces need to be cleaned each time. 

With this adapter, you can remove the grinder completely, keep everything cleaner, and still brew as normal with pre-ground coffee.

Prints quickly, installs in seconds, and saves you from unnecessary mess.

 

No Supports needed - print them top-side down.

Tagi