Cuisinart 14-cup Food Processor Blade Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This food processor doesn't come with any sort of holder or caddy for its slicing/shredding attachments.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 891
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This food processor doesn't come with any sort of holder or caddy for its slicing/shredding attachments. So I designed a 3D printable option.
Each holder requires the following metal parts:
- 3pcs M4x12mm socket cap head screws
- 3pcs M4x7mm heat-set inserts
Whoever remixes it to use pressed-in nuts instead of heat set inserts gets 1 internet point! FreeCAD and STEP versions included.
Print instructions
Rafts: No
Resolution: 0.3
Infll: 10%
Print 1 of each piece per holder. Flip the big flat faces down on the table. If you use supports (recommended, they give much cleaner holes) just press them out of the finished print with the M4 screws.
Press the heat-set inserts in from the side that was on the build plate, the holes are slightly conical.
Screw the two sides together, then slide the food processor disc attachment in for storage.