IKEA Vangsta Table Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a table leg riser for the Vangsta line of tables from IKEA. It raises the height of the table to 35 inches.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is a simply designed table leg riser for the Vangsta line of tables from IKEA. It raises the height of the table from it's original 28 ¾ inches to the height of 35 inches tall. (This was chosen to allow the table to lie flush with an island I already had in my kitchen.) It's worked really well, and I hope it will help someone else out there. You should feel free to adjust the height of the risers to your liking by extruding the bottom in your favorite design program.
You will of course need to print 4 of them, one for each leg of your table. I used 40% infill and 4 layer thick walls, and no support is necessary