1 / 4
Dial Gauge Holder for Ikea Skadis [NO SUPPORT REQUIRED]
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dial gauge holder for Ikea Skadis.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
- Printing parameter suggestions: 4 walls, 5 top & bottom, at least 25% infill.
- Requires no support.
- Requires 1 M3x12 screws and additional 1 printed M3 Skadis T-nut by @ORM_649441 from Skadis T-nut mounting system, threaded for M3 or UNC #5-40 screws. by ORM | Download free STL model | Printables.com