1 / 4
Improved Arccos SuperStroke Putter Accessory
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A better version of the Arccos SuperStroke Putter Accessory
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Improved Arccos SuperStroke Putter Accessory - 3D Model Files Included
This is a refined version of the Arccos SuperStroke Putter Accessory. The official accessory costs $20… no thank you.
Included are:
- Fusion 360 (.f3d) file for full customization
- Standard STL file for typical 3D printers
- STL file with an enlarged sensor cavity for printers with less precise tolerances
Printing Instructions:
- Prepare Sensor: Open sensor housing and remove ‘padding’ stuck to bottom.
- Model Orientation: In slicer place the model sensor-side down and screw-side up.
- Pause Print: Add a pause in your G-code at the last layer height of the cavity.
- Insert Sensor: Once paused, insert the Arccos sensor into the cavity.
- Resume Printing: Continue printing to enclose the sensor.
Troubleshooting
- The sensor fit snugly on my Bambu Lab P1S, so if your printer is less precise, use the provided STL with a larger cavity for better compatibility or modify the Fusion 360 file.
- If the print moves when you are inserting the sensor you need to improve your print plate adhesion.