1 / 4
Improved Arccos SuperStroke Putter Accessory
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A better version of the Arccos SuperStroke Putter Accessory
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 58
- Makes
- 0
- Views
- 421
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
Improved Arccos SuperStroke Putter Accessory - 3D Model Files Included
This is a refined version of the Arccos SuperStroke Putter Accessory. The official accessory costs $20… no thank you.
Included are:
- Fusion 360 (.f3d) file for full customization
- Standard STL file for typical 3D printers
- STL file with an enlarged sensor cavity for printers with less precise tolerances
Printing Instructions:
- Prepare Sensor: Open sensor housing and remove ‘padding’ stuck to bottom.
- Model Orientation: In slicer place the model sensor-side down and screw-side up.
- Pause Print: Add a pause in your G-code at the last layer height of the cavity.
- Insert Sensor: Once paused, insert the Arccos sensor into the cavity.
- Resume Printing: Continue printing to enclose the sensor.
Troubleshooting
- The sensor fit snugly on my Bambu Lab P1S, so if your printer is less precise, use the provided STL with a larger cavity for better compatibility or modify the Fusion 360 file.
- If the print moves when you are inserting the sensor you need to improve your print plate adhesion.