RC4WD Trail Finder 2 - Chassis Parts / Update 16.08.2026 - New Skid for TF2 11.3"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm working on modernizing of the grandfather. Maybe someone can use the parts.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 862
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
General Description:
Parts are for different wheelbases, pay attention to the description.
SWB - Short Wheel Base, NWB - Normal Wheelbase, LWB - Longe Wheel Base.
L and R mean left and right. Most parts are available for both sides; if not, they must be mirrored in the slicer.
All screw connections require M3 screws and sometimes nuts.
All Parts printet with 15% infill in PETG or stronger
Parts Description: xxl_battery_plate_XtraCab
Designed for the LWB chassis and XtraCab body.
Can be combined with my No-Rotable Body-Mounts (screwed to them).
DONT work with 2speed.
OTHER Bodys not testet.
Parts Description: no_rotable_body_mounts_XtraCab_4Runner
V2 has holes at the top to mount my XXL Battey Plate on the top.
Parts Description: high_clearance_skid_3gear (NWB & LWB)
Designed for LCG gearboxes with Axial 3Gear hole pattern (Most DLUX NOD clones will fit).
I use (see picture) the INJOR LCG gearbox with Fusion Pro (No cuts to the bodywork or interior are necessary).
Screwed to the rails and the body mounts / floor boards.
Parts Description: akku_servo_shock
The new skid (high_clearance_skid_3gear required) creates more space at the front of the vehicle.
Space for battery and servo.
Integrated shock tower / screwed to the akku_plate.
Shocktower are designed for 80mm shocks.
On NWB works only with stubby motor (or use the short Version).
Parts Description: k10_blazer_foor & slider
Floor boards and body mounts for the Chevy K10 & Blazer.
Requires the high_clearance_skid_3gear_LWB or NWB.
The connect part allows the battery servo plate to be connected to the floor boards (very stable).
Sliders protect the body (not necessary).
Parts Description: k10_blazer_inner_fender (for high clearance skid)
Inner fenders that are screwed to the floorboards of the K10 & the Blazer.
Parts Description: servo_riser_spacer
On all TF2 models, the servo horn hits the axles during heavy suspension compression.
The spacer is available in different heights for this purpose.