RC4WD Trail Finder 2 - Chassis Parts / Update 16.08.2026 - New Skid for TF2 11.3"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I'm working on modernizing of the grandfather. Maybe someone can use the parts.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 131
- Makes
- 0
- Views
- 835
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
General Description:
Parts are for different wheelbases, pay attention to the description.
SWB - Short Wheel Base, NWB - Normal Wheelbase, LWB - Longe Wheel Base.
L and R mean left and right. Most parts are available for both sides; if not, they must be mirrored in the slicer.
All screw connections require M3 screws and sometimes nuts.
All Parts printet with 15% infill in PETG or stronger
Parts Description: xxl_battery_plate_XtraCab
Designed for the LWB chassis and XtraCab body.
Can be combined with my No-Rotable Body-Mounts (screwed to them).
DONT work with 2speed.
OTHER Bodys not testet.
Parts Description: no_rotable_body_mounts_XtraCab_4Runner
V2 has holes at the top to mount my XXL Battey Plate on the top.
Parts Description: high_clearance_skid_3gear (NWB & LWB)
Designed for LCG gearboxes with Axial 3Gear hole pattern (Most DLUX NOD clones will fit).
I use (see picture) the INJOR LCG gearbox with Fusion Pro (No cuts to the bodywork or interior are necessary).
Screwed to the rails and the body mounts / floor boards.
Parts Description: akku_servo_shock
The new skid (high_clearance_skid_3gear required) creates more space at the front of the vehicle.
Space for battery and servo.
Integrated shock tower / screwed to the akku_plate.
Shocktower are designed for 80mm shocks.
On NWB works only with stubby motor (or use the short Version).
Parts Description: k10_blazer_foor & slider
Floor boards and body mounts for the Chevy K10 & Blazer.
Requires the high_clearance_skid_3gear_LWB or NWB.
The connect part allows the battery servo plate to be connected to the floor boards (very stable).
Sliders protect the body (not necessary).
Parts Description: k10_blazer_inner_fender (for high clearance skid)
Inner fenders that are screwed to the floorboards of the K10 & the Blazer.
Parts Description: servo_riser_spacer
On all TF2 models, the servo horn hits the axles during heavy suspension compression.
The spacer is available in different heights for this purpose.