Babyproof Outlet Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Outlet cover for standard US outlets
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 596
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the original design but the thick sides for the command strips add a lot to the filament usage and print time. I slanted them so you still have the same amount of room for the command strips on the wall but the front is about as wide as the outlet.
The “shelled” variant is the same except the slated sides are hollow to save more filament and a bit more time.
Compared to the original using my typical print settings, the normal variant saves 70 grams of filament and 1 hour of print time. The shelled variant saves 95 grams of filament and 1 hour and 20 minutes of print time.